Preparing for Operation, To Operate, Sanding

OPERATION

PREPARING FOR OPERATION

CAUTION:

Be careful not to let your hand cover the air vents.

TO OPERATE

When applicable, clamp or otherwise secure the work to prevent it from moving under your sander.

WARNING:

Unsecured work could be thrown towards the operator causing injury.

SANDING

See Figures 3 and 4.

Hold sander in front and away from you, keeping it clear of the workpiece. Start sander and let the motor build to its maximum speed, then gradually lower on the work with a slight forward movement. Move it slowly over workpiece using forward and backward or side to side strokes. Upon completion of sanding operation, always remove sander from workpiece before turning it off.

DO NOT FORCE. The weight of the unit supplies adequate pressure, so let the sandpaper and sander do the work. Applying additional pressure only slows the motor, rapidly wears sandpaper and greatly reduces sander speed. Excessive pressure will overload the motor causing possible damage from motor overheating and can result in inferior work. Any finish or resin on wood may soften from the frictional heat. Do not allow sanding on one spot too long as sander's rapid action may remove too much material, making the surface uneven.

SANDPAPER SELECTION

Selecting the correct size grit and type sandpaper is an extremely important step in achieving a high quality sanded finish. Aluminum oxide, silicon carbide, and other synthetic abrasives are best for power sanding. Natural abrasives, such as flint and garnet are too soft for economical use in power sanding.

In general, coarse grit will remove the most material and finer grit will produce the best finish in all sanding operations. The condition of the surface to be sanded will determine which grit will do the job. If the surface is rough, start with a coarse grit and sand until the surface is uniform. Medium grit may then be used to remove scratches left by the coarser grit and finer grit used for finishing of the surface. Always continue sanding with each grit until surface is uniform.

Fig. 3

Fig. 4

WARNING:

Do not wear loose clothing or jewelry when operating sander. They could get caught in moving parts causing serious injury. Keep head away from sander and sanding area. Hair could be drawn into sander causing serious injury.

Page 7

DS1100 specifications

The Ryobi DS1100 is a versatile and powerful stationary drill press that stands as a testament to Ryobi's commitment to innovation and quality in power tools. Designed for both professional users and DIY enthusiasts, the DS1100 offers a range of features that enhance precision, efficiency, and versatility, making it suitable for various applications.

One of the standout features of the Ryobi DS1100 is its robust motor, providing 1/3 horsepower. This powerful motor delivers consistent performance across a variety of materials, including wood, metal, and plastics. The drill press is equipped with a variable-speed mechanism, allowing users to adjust the speed from 620 to 3,100 RPM. This variable speed control is essential for achieving optimal results, as different materials require different drilling speeds for efficient operation.

The 8-inch swing capacity of the DS1100 is another notable characteristic, allowing users to work with larger workpieces without compromising accuracy. The table on the drill press is adjustable, providing versatility in terms of height and angle. It can tilt up to 45 degrees, enabling users to perform bevel cuts and other angled operations effortlessly. The work table also features a built-in laser guide system, ensuring precise alignment and enhancing the drill press's accuracy.

Safety is a priority for Ryobi, and the DS1100 is equipped with a safety switch that prevents accidental starts. This feature provides users with peace of mind, especially when working in busy workshops. Additionally, the drill press includes a robust base with pre-drilled holes, allowing for stable mounting on workbenches for safe operation.

The Ryobi DS1100 is designed for ease of use, featuring a user-friendly depth adjustment system that allows users to set drilling depths quickly and accurately. This feature is particularly beneficial for repetitive drilling tasks, as it reduces setup time and improves overall productivity.

In terms of build quality, the DS1100 is constructed with durable materials to withstand the rigors of regular use. Its sturdy design ensures minimal vibration during operation, leading to enhanced precision and control.

In conclusion, the Ryobi DS1100 is an exceptional drill press that combines power, precision, and user-friendly features. Its variable speed control, laser guide, adjustable work table, and safety mechanisms make it a reliable choice for anyone looking to tackle a wide range of drilling tasks with confidence and ease. Whether for home projects or professional use, the DS1100 is a valuable addition to any workshop.