FEATURES
Your sander is suitable for sanding with coarse, medium, and fine grit sandpaper. It will produce a fine scratch free finish when used to sand with the grain on wood surfaces. It has been designed so that flush corner sanding on three sides of the sander is possible.
Your sander has a comfortable palm grip handle that provides maximum
Your sander has quick action paper clamps. This makes changing or replacing sandpaper fast and easy.
Your sander also has a built in dust collection that collects dust through punched holes in the sandpaper and cushion. See Figure 1.
Before attempting to use your sander, familiarize yourself with all operating features and safety requirements.
SWITCH
This tool is equipped with a simple switch control. To turn the sander "ON", slide the switch to the left () as shown in Figure 1. Slide the switch to the right (O) to turn the sander "OFF".
ELECTRICAL CONNECTION
Your sander has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power, and the motor will overheat. If your tool does not operate when plugged into an outlet,
TO
TURN OFF
SWITCH
TO
TURN ON
DUST BAG | PAPER CLAMP |
PAPER PUNCH
LEVER
TAB
CUSHION
Fig. 1
WARNING: Do not allow familiarity with your sander to make you careless. Remember, a careless fraction of a second is sufficient to inflict severe injury.
Page 6