FEATURES
DOUBLE INSULATION
Your Ryobi power tool is double insulated. This means you are separated from the tool’s electrical system by two complete sets of electrical insulation. This extra layer of insulation is intended to protect the user from electrical shock due to a break in the wiring insulation. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.
WARNING:
The double insulated system is intended to protect the user from shock resulting from a break in the tool's internal wiring. Observe all normal safety precautions related to avoiding electrical shock.
UNPACKING
Your sander has been shipped completely assembled and ready for use. See Figure 2. Inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest authorized service center to obtain replacement parts before attempting to operate sander.
■Carefully lift sander from the carton and place it on a level work surface.
■Do not discard the packing materials until you have carefully inspected the sander, identified all parts, and satisfactorily operated your new sander.
WARNING:
If any parts are damaged or missing, do not operate your sander until the parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
To prevent accidental starting or electrical shock that could cause possible serious personal injury, assemble all parts to your sander before connecting it to power supply. Sander should never be connected to power supply when you are assembling parts, making adjustments, installing or removing sanding sheets, cleaning, or when not in use.
1
5
3
PACKING LIST:
1. Sander
2. Light Scrubbing pad (White) (1)
3.Heavy Duty Scrubbing pad (Red) (1)
4.Polishing pad (Gray) (1)
5.
6.
7.
8. Operator’s Manual (1) (Not shown)
6 | 7 |
29. Warranty and Registration Card (1) (Not shown)
4
Fig. 2
Page 7