Ryobi FL96 manual Switch, Rotating Head, Bulb Replacement, To Replace Bulb

Page 5

OPERATION

SWITCH

See Figure 3.

To turn your light on and off, depress switch trigger.

180° ROTATING HEAD

See Figure 3.

Your flashlight has the feature of rotating the head 180° in either direction.

BULB REPLACEMENT

See Figure 4.

When purchasing replacement bulb, request recommended part number 981258-003.

TO REPLACE BULB:

Remove battery pack from flashlight.

Remove lens cover by turning cover in counterclockwise direction, then remove cover.

Remove old bulb from spring.

Position new bulb in spring.

Replace lens cover.

Replace battery pack.

Note: For your convenience, your flashlight has a spare bulb storage area. It is located behind the lens cover. See Figure 4.

SWITCH

TRIGGER

180° ROTATING HEAD

Fig. 3

BULB STORAGE

AREA

BULB

LENS COVER

Fig. 4

Page 5

Image 5
Contents Save this Manual for Future Reference OPERATOR’S Manual Volt Cordless Flashlight Model NO. FL96Rules for Safe Operation IntroductionRead ALL Instructions Avoid Dangerous EnvironmentWhen Servicing USE only Identical Replacement Parts Safety Rules for FlashlightsImportant Safety Rules for Battery Tools To Charge Battery Pack To INSTALL/REMOVE Battery PackOperation Charging FlashlightBulb Replacement SwitchSwitch Trigger Rotating Head Bulb Storage Area Lens Cover Rotating HeadBatteries MaintenanceDisposal of the Exhausted Battery Page Operators Manual Volt Cordless Flashlight Model NO. FL96 Service Model NO. and Serial no