UNPACKING
CAUTION:
To prevent accidental starting or electrical shock that could cause possible serious personal injury, assemble all parts to your saw before connecting it to power supply. Saw should never be connected to power supply when you are assembling parts, making adjustments, lubricating, installing or removing blades, cleaning, or when not in use.
■Carefully lift saw from the carton and place it on a level work surface.
■Remove pack of 4 extra blades and operator's manual from the carton.
WARNING:
If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
■Do not discard the packing materials until you have carefully inspected the saw, identified all parts, and satisfactorily operated your new saw.
Note: If any parts are damaged or missing, do not attempt to plug in the power cord and turn the switch on until the damaged or missing parts are obtained and are installed correctly.
Your scroll saw comes completely assembled. A package of 4 extra blades, blade changing rod, "T" handle wrench, and an operator's manual are included with your saw.
TOOLS NEEDED
The small combination square shown in figure 2 is the only tool (not provided) you will need for making adjustments and alignment:
SMALL
COMBINATION
SQUARE
Fig. 2
TABLE LOCK LEVER
MOTOR
LOCK OFF POST
ON/OFF KNOB
Fig. 3
Page 8