Ryobi R10632 specifications Meaning

Page 2

TABLE OF CONTENTS

 

■ Table of Contents

2

■ Accessories

2

■ Unpacking

2

■ Rules For Safe Operation

3-6

A. Important Safety Rules For Battery Tools

4

B. Important Safety Instructions For Charger

4

C. Important Safety Instructions For Circular Saws

5

■ Symbols

6

■ Features

7

■ Operation

8-17

■ Maintenance

18

■ Battery Pack Removal and Preparation For Recycling

18

■ Parts Ordering / Service

20

Look for this symbol to point out important safety precautions. It means attention!!!

 

Your safety is involved.

 

ACCESSORIES

 

The following recommended accessories are current and were available at the time this manual was printed.

 

5-1/2 in. (140 mm) Thin Kerf Blade

 

UNPACKING

 

Your circular saw has been shipped completely assembled except for the blade. Inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest Ryobi Authorized Service Center to obtain replacement parts before attempting to operate saw. A blade, blade wrench, and this operator's manual are also included.

WARNING:

If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance, and repair information.

MEANING

Do not expose to rain or use in damp locations.

Page 2

Image 2
Contents Save this Manual for Future Reference Thank YOU for Buying a Ryobi Cordless Circular SAWMeaning Rules for Safe Operation Read ALL InstructionsDo not Charge Battery Tool in a Damp or WET Location Important Safety Rules for Battery ToolsImportant Safety Instructions for Charger When Servicing USE only Identical Replacement PartsGuard Against Kickback Important Safety Instructions for Circular SawsLower Blade Guard Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Meaning Safety Alert Symbol Know Your Cordless Circular SAW FeaturesSwitch ApplicationsLED Function of Charger Charging Battery PackOperation Important Information for Recharging HOT BatteriesTo Install Battery Pack To Assemble or Remove BladeTo Remove Blade SAW BladesBlade Guard System To Lessen the Chance of Kickback KickbackKickback is Caused by Kickback Blade SET TOO DeepStarting a CUT Depth of CUT AdjustmentTo Adjust Blade Depth To Help Maintain Control Width of CUT Scale RIP Cuts Base AssemblyTo Cross CUT or RIP CUT TOP View of SAW Guideline Front of SAW Blade Guide NotchTo Adjust Bevel Setting Blade Guide Notch GuidelineTo Check To AdjustPositive 0 Bevel Stop To Pocket CUTTo RIP CUT To Assemble Optional RIP GuideBatteries MaintenanceBattery Pack Removal and Preparation for Recycling Page ¥ Service ¥ Model NO. and Serial no