Ryobi specifications Operators Manual JIG SAW / JSO48, Thank YOU for Buying a Ryobi JIG SAW

Page 1

OPERATOR'S MANUAL

JIG SAW / JSO48

DOUBLE INSULATED

0

SPECIFICATIONS:

Length Of Stroke

19 mm (3/4 in.)

Strokes Per Minute

0 - 3000 spm

 

 

Rating

120 volts, 60 Hz, AC only, 4.0 amperes

 

 

Switch

Variable speed

Orbital Motion

Blade / Hex Key Storage

Net Weight1.5 kg (3.4 lbs.)

THANK YOU FOR BUYING A RYOBI JIG SAW.

Your new jig saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire operator's manual before using your new jig saw.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your jig saw properly and only for what it is intended, you will enjoy years of safe, reliable service.

Thank you again for buying Ryobi tools.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1
Contents Thank YOU for Buying a Ryobi JIG SAW Operators Manual JIG SAW / JSO48Rules for Safe Operation Table of ContentsRead ALL Instructions Rules for Safe Operation When Servicing USE only Identical Ryobi Replacement PartsKnow Your JIG SAW OperationApplications Electrical ConnectionSwitch Trigger SwitchLOCK-ON Button Variable SpeedBlade and HEX KEY Storage To Install BladesBlade Storage HEX KEY StorageOrbital Motion General CuttingStraight CUT Scroll CuttingTo Make a Plunge CUT Plunge CuttingSPLINTER-FREE Cutting HOW to Position Base in the SPLINTER-FREE Cutting PositionOptional Edge Guide HEX KEY Narrow Slot Used for SPLINTER-FREE Cutting BaseMetal Cutting MaintenanceGeneral Extension CordsJSO48 Operators Manual JIG SAW / JSO48