General Safety Rules, Work Area, Electrical Safety

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in elec- tric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmo- spheres, such as in the presence of flammable liquids, gases, or dust. Power tools may create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create a risk of fire.

Use battery only with charger listed.

BATTERY PACK	CHARGER
130224007 • 130256001	1423701

Do not abuse the cord. Never use the cord to carry the charger. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.

PERSONAL SAFETY

Stay alert, watch what you are doing and use com- mon sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jew- elry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jew- elry, or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or insert- ing the battery pack into a tool with the switch on in- vites accidents.

Remove adjusting keys or wrenches before turn- ing the tool on. A wrench or a key that is left attached

to a rotating part of the tool may result in personal in- jury.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your ap- plication. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is danger- ous and must be repaired.

Disconnect battery pack from tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cut- ting edges are less likely to bind and are easier to con- trol.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool.

Keep the tool and its handle dry, clean and free from oil and grease. Always use a clean cloth when clean- ing. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your tool. Fol- lowing this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.

OJ1802 specifications

The Ryobi OJ1802 is an innovative and reliable electric jigsaw that caters to both professional tradespeople and DIY enthusiasts. Renowned for its versatile design and powerful features, this jigsaw makes detailed cutting tasks effortless, whether working with wood, metal, or other materials.

One of the standout features of the Ryobi OJ1802 is its robust 6-amp motor, providing ample power for demanding projects. This motor ensures consistent performance, allowing users to tackle tougher jobs without the risk of stalling. Coupled with a variable speed control setting, which ranges from 0 to 3,000 strokes per minute, users can tailor the speed according to their specific cutting needs.

The OJ1802 is designed with precision in mind. It features an adjustable bevel cutting capability, allowing for angles of up to 45 degrees to the left and right. This adjustable base plate provides versatility in creating intricate bevel cuts and allows for added flexibility in various woodworking applications.

Another key characteristic of this jigsaw is its tool-less blade change system. This user-friendly design makes it easy to switch between blades, allowing for quick changes that save time and improve workflow. The OJ1802 is compatible with a wide range of jigsaw blades, making it adaptable for different materials and desired cut styles.

Ryobi has also incorporated advanced technology into the OJ1802’s design to enhance user comfort and control. The jigsaw features an ergonomic handle with a soft grip, ensuring a secure and comfortable hold during prolonged use. This reduces fatigue, enabling users to maintain control and precision over extended periods.

Additionally, the OJ1802 is equipped with a dust blower feature that keeps the cutting line clear, improving visibility and accuracy. This is particularly beneficial when working with intricate patterns or precise cuts.

In summary, the Ryobi OJ1802 jigsaw combines power, precision, and user-friendly features designed to meet the demands of any cutting task. With its adjustable speed, bevel cutting capability, quick blade change system, and ergonomic design, it stands out as an essential tool for anyone looking to achieve professional-quality results in their woodworking projects. Whether you're a seasoned craftsman or a hobbyist, the OJ1802 delivers the performance and reliability needed for successful and accurate cutting.