SECTION 3: SETUP
Unpacking
Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover any damage, please call us immediately at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi- tion of your shipment, inventory the contents.
SUFFOCATION HAZARD!
Keep children and pets away from plastic bags or packing materials shipped with this machine. Discard immediately.
Inventory
The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them.
If any
NOTICE
If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are
Model T25100 (Mfg. Since 8/12)
Box Inventory (Figures | Qty | |
A. | Powder Coating System | 1 |
B. | powder Cups w/Gaskets & Lids | 2 |
C. | Moisture Filter | 1 |
D. | powder Flow Regulator Screw | 1 |
E. | Fuse 0.5A, | 1 |
F. | Scatter Tip 1⁄2" | 1 |
G. | scatter Tip 3⁄4" | 1 |
H. | scatter Tip 1" | 1 |
A
Figure 2. Powder coating system.
B
H
GC
F
E D