Instructions
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
311082B
Pressure Roller with
20-inch Fixed Extension
- For application of architectural paints and coatings -
Model 287713, Series A
•20 inch (50 cm)
•9 inch (23 cm) roller frame
• 1/2 inch (13 mm) nap roller cover | WLD |
|
3600 psi (24.8 MPa, 248 bar) Maximum Working Pressure*
*The best operating pressure is the lowest pressure that provides an even paint supply to the roller and typically does not exceed 300 psi (2.1 MPa, 21 bar).
CAUTION
Never leave water in pump, gun or pressure roller. Doing so could cause corrosion and damage from freezing. For storage, flush the system with Pump
Defender™ or mineral spirits/paint thinner.