ACCESSORIES
Standard accessories included with your laminate trimmer are two wrenches and a 1/2 in. (13 mm) diameter flush trim bit.
The following is a list of optional accessories available for your TR30 Laminate Trimmer:
Part No. | Description |
6072373 | Trimmer Guide |
4675208 | Straight Trim Bit |
6072063 | Straight Guide |
HELPFUL HINTS
✓Always clamp workpiece securely before trimming.
✓A safe operator is one who thinks ahead.
✓Always wear eye protection when trimming.
✓Make setup adjustments carefully. Then double check. Measure twice and cut once.
✓Keep cutters clean and properly sharpened.
✓Don’t let familiarity make you careless.
✓Study all safety rules and do the job safely.
✓NEVER place your hands in jeopardy.
✓Make certain clamps can’t loosen while in use.
✓Test difficult setups on scrap — Don’t waste lumber.
✓Plan each operation before you begin.
✓Provide for smoother operation by cleaning your trimmer frequently. Shake trimmer or blow with an air jet to remove sawdust buildup.
✓THINK SAFETY BY THINKING AHEAD.
EDGE SHAPING WITH OPTIONAL TRIMMER GUIDE
Fig. 10
Fig. 11
WARNING:
Avoid hand positions that may expose fingers to cutter through open areas of trimmer base. See Figure 11.
Page 12