Ryobi TR45K manual Assembly

KNOW YOUR LAMINATE TRIMMER

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

SWITCH

The ON/OFF switch is located on top of the motor hous- ing.

DEPTH OF CUT SCALE

The trimmer has an adjustable depth of cut scale.

LAMINATE SUB-BASE

The sub-base gives the operator greater visibility of the workpiece.

WOODWORKING SUB-BASE

The woodworking sub-base is used to rout circular and parallel grooves. It allows the operator to grasp the trimmer with both hands

UNPACKING

This product requires assembly.

nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-525-2579 for assistance.

PACKING LIST

Laminate Trimmer with Laminate Sub-base

Woodworking Sub-base

Sub-base Handles (2)

Ball Bearing Flush Trim Bit

Carrying Case

Wrenches

Operator’s Manual

WARNING:

If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.