| Specifications | |
|
| |
ITEM | DESCRIPTION | |
|
| |
Welding Current | 25 ~ 85 amps | |
|
| |
Duty Cycle | 20% at 75 amps; 45% at 50 amps; 90% at 35 amps; | |
100% at 25 amps | ||
| ||
|
| |
Power Consumption | 120 VAC, 21 amps at 60 Hz (Peak) | |
|
| |
Open Circuit Voltage | 19 to 30 volts | |
|
| |
Heat Control | 25 ~ 85 amps, variable | |
|
| |
Ground Cable | 6 feet, 4 AWG, single instulation, grounding clamp. | |
|
| |
Torch Power Cable | 6 feet, 8 AWG, single insulation | |
|
| |
Power Cord | 6 feet, | |
Thermal Overload | Automatic shutdown and restart after cool down | |
Protection with Light | ||
| ||
|
| |
Wire Size | 0.023 to 0.035 inch steel and stainless steel | |
0.030 to 0.035 inch aluminum; 0.030 flux core | ||
| ||
|
| |
Welding Material Size | 22 gauge to 5/32" | |
|
| |
Wire Spool Size | 4 inch spool diameter | |
|
| |
Weight | 55.1 lbs. | |
|
| |
| 1 - Hand held shaded face shield | |
Accessories | 1 - Brush Hammer | |
1 - Wheel Kit | ||
| ||
| 1 - 2 lb. spool of flux wire | |
|
|
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Keep work area clean. Cluttered areas invite injuries.
2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.
3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
SKU 06098 | Page 2 | 12/03 |