Grizzly G4181, G7873 Clean Up Assembly, Figure ??. Cleaner/degreaser available from Grizzly

Clean Up Assembly

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or degreaser, such as shown in Figure ??. For thorough cleaning, some parts must be removed.

For optimum performance, clean all moving parts or sliding contact surfaces. Avoid chlo- rine-based solvents, such as acetone or brake parts cleaner that may damage painted surfac- es. Always follow the manufacturer’s instructions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.

G2544—Solvent Cleaner & Degreaser

A great product for removing the waxy shipping grease from your machine during clean up.

Figure ??. Cleaner/degreaser available from

Grizzly.

-14-

You MUST assemble all guards, fences, and holdowns before starting your machine or power feeder. Failure to heed this warning could result in serious personal injury.

To correctly position this power feeder on your table top, completely assemble the power feeder first in the order of A, B and C as shown in Figures 6 and 7. Next, refer to Base Mounting on Page ???. With the power feeder unit completely assembled, it will be easier to locate where on the table top you will need to drill your base mounting holes, so you can take advantage of the full range of power feeder swing and adjustments.

B

A

Figure 6. Stand assembly.

C

Figure 7. Assembled unit.

Model G4181/G7873 1-HP Power Feeder