5.0Cold saw features
Figure 1
Miter cutting head
The miter cutting head is the unit that performs the cut, and is pivoted downward manually by means of the operating lever. The head is mounted to a cast iron base, and consists of a blade support unit with guard, transmission unit, and motor. The depth of cut is set by adjusting the depth stop. The miter cutting head swivels and locks into any position within a 135º range.
rotated for fast clamping. An
Control panel
The panel features independent ON and OFF buttons with indicator light, a mushroom style red emergency OFF switch, coolant flow switch, and a switch for speed selection.
Miter position lock
The miter position lock secures the miter cutting head from movement. The miter is secured when the lever is moved to the right and is released when the lever is moved to the left.
Self-centering vise
The
6
Flood coolant system
The coolant pump must be submerged before operating to prevent damage to the pump.
Coolant is dispensed directly onto the saw blade from a coolant fitting on the upper blade guard. Coolant is provided through tubing from the coolant pump which rests inside the machine base. See under Maintenance for further information about proper coolants.