Bernard SPEC FN-1.1 manual Flex Necks, MIG Welding Accessory, Right Tool for the Job, Bernard

Flex Necks

MIG Welding Accessory

Bernard Flex Neck

See neck spec sheet for details on our complete offering of interchangeable necks.

Bernard®

An Illinois Tool Works Company	Phone: 800-946-2281 (US Only) 708-946-2281 (Outside US)
449 West Corning Road, Box 667	Fax: 708-946-6726
Beecher, Illinois 60401 USA	For more information, visit us at BernardWelds.com

Issued Nov. 2006 • SPEC FN-1.1

The Right Tool for the Job.

To improve comfort and minimize downtime, we offer a wide variety of interchangeable necks for greater flexibility and better weld puddle visibility.

Easily adjusted to fit any angle and save time and money for changing out an inventorying expensive specialty guns.

Fit all Q-Guns™ and S-Guns™ - from 150 - 600 Amps.

Changeover and rotate without tools.

Stay-Tite™ connection improves conductivity for better weld quality, lessens heat to increase operator comfort.

Available in 6" and 8" lengths limited access positions and improved operator comfort.

Easily removable for Jump Liner changeover.

Stay-Tite™ Technology

Long-lasting power cable compression fittings and necks with large tapered gun connections combine to form the foundation of Bernard® Stay-TiteTMtechnology. This technology ensures optimal conductivity to increase weld consistency and lessen heat output while improving product durability.

Made with USA

Pride and without

Compromise in the