Bernard FLX3515AM manual Amp Self-Shielded Fcaw Guns, Dura FluxTM Gun Part Number, Bernard

Dura-Flux™

350 Amp Self-Shielded FCAW Guns

350 Amp Dura-FluxTMgun shown with CenterfireTM contact tip, sleeved 6 inch neck with 60˚ bend and trigger guard.

Built for welders using self- shielded flux-cored wire, Dura-Flux guns are designed for exceptional performance and comfort in

the most demanding industrial environments.

Dura FluxTM Gun Part Number

Build a Dura-Flux gun part number by choosing required cable length, neck and direct plug.

FLX3515AM is an example of a typical configuration. It consists of a 350 amp Dura-Flux gun with 15' cable, 6" x 60˚ neck and Miller style direct plug.

Amperage	Cable Length			Neck		Direct Plug	Duty Cycle
FLX35 350 amp	10	10' (3.05 m)	A	6" (15.2 cm) x 60˚	M	Miller®
	15	15' (4.57 m)	D	12" (30.5 cm) x 30˚	L	Lincoln®	60% NEMA
					T	Tweco®	at 350 Amps
					E	Euro®

All Dura-Flux guns are compatible with 1/16" - 3/32" (1.6 mm - 2.4 mm) wire.

Bernard® and Miller® are registered trademarks of Illinois Tool Works Inc. Other brands mentioned are for reference only and are the registered trademarks of their respective companies, and are not affiliated with Illinois Tool Works Inc.

Issued March 2008 • Index No. SPEC DF-1.3

All Guns are Not Created Equal.

A welding gun should be durable, easy to use and customized to your specific application. Our guns put you in control: you choose the options you need and we'll build a gun to last. We even ship most of our guns within 24 hours.

CenterfireTM contact tips are easy-to-use and high performing - they provide better arc starts, less spatter and more consistent welds - and also last up to three times longer than competitive brands.

Sleeved and aluminum armored necks available in multiple length options for optimal weld accessibility and improved operator comfort.

Trigger is sealed from outside contaminants, simply replaced and absorbs less heat than a metal trigger for long-life, greater arc-on time and lower heat output.

Trigger guard instead of full size heat shield allows access to tight spaces while protecting trigger from damage.

Ultra heavy-duty steel monocoil power cables are highly resistant to kinking for exceptional wire feed in abusive environments.

Back end with durable rigid strain relief and easily interchangeable direct plugs and trigger leads connect to wire feeders and machines from major manufacturers and allow simple maintenance.

Power pin liner changes quickly without set screw for user-friendly maintenance and reduced downtime.

Made with USA

Pride and without

Compromise in the

Bernard®

An Illinois Tool Works Company	Phone: 800-946-2281 (US Only) 708-946-2281 (Outside US)
449 West Corning Road, Box 667	Fax: 708-946-6726
Beecher, Illinois 60401 USA	For more information, visit us at BernardWelds.com