| Specifications | |
|
| |
ITEM | DESCRIPTION | |
|
| |
Open Voltage | AC operation: 48A/22V to 130A/25.2V Adjustable | |
DC operation: 25A/21V to 99A/24V Adjustable | ||
| ||
|
| |
Power Requirement | 230 VAC, single phase, 60 Hz | |
|
| |
Absorbed Power | 5.4 Kilowatts | |
|
| |
Duty Cycle | 10%@ 130 AMPS(AC), 15%@ 100 AMPS(DC) | |
|
| |
Thermal Overload | DC setting: 20 minutes shutdown; 4 minute back on | |
Protection | AC setting: 10 minutes shutdown; 3 minute back on | |
|
| |
Dimensions | 26 (L) x | |
|
| |
Ground Cable | 4 AWG, single insulation, 6 foot | |
|
| |
Torch Cable | 4 AWG, single insulation, 6 foot | |
|
| |
Power Cord | ||
| Power switch with green light indicator | |
Features | Thermal overload protection with amber light indicator | |
| Current adjustment knob | |
|
| |
| Face Shield | |
Accessories | Wire / Slag Brush | |
| Pull and Cable Handle | |
|
| |
Weight | 58.35 lbs | |
|
|
Note: Arc Welding Accessory Kit (SKU #35491) is available from Harbor Freight Tools. This kit includes: 3M Cable with Electrode Holder, 2M Cable with Ground Clamp, Welding Mask and Combination Brush/Welding Hammer.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re- duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Keep work area clean. Cluttered areas invite injuries.
2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.
3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
REV 03/01; 02/05; 03/05; REV 07/05
SKU 44568 | For technical questions, please call | Page 2 |