Chicago Electric 92496 operating instructions Personal Safety

Page 3

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.

PERSONAL SAFETY

4.Stay alert. Watch what you are doing, and use common sense when oper- ating a power tool. Do not use a power tool while tired or under the influ- ence of drugs, alcohol, or medication. A moment of inattention while operat- ing power tools may result in serious personal injury.

5.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

6.Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents.

7.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.

8.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

9.Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

TOOL USE AND CARE

10.Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

11.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

12.Do not use the power tool if the Power Switch does not turn it on or off.

Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.

13.Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

SKU 92496

PAGE 3

Image 3
Contents For technical questions, please call Heavy Duty OXY Acetylene Welding OutfitWork Area Product SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Service Specific Safety Rules SKU California Health & Safety Code 25249.5 et seq Assembly and Operating Instructions UnpackingSee Figure E, next Parts B1-B10 Parts A1-A20EParts C1-C27 A18D1B Your gas supplier immediately. See Figure FC24 C25 B10Acetylene I.G Min MaxC26 See Figure LSee Figures E, and L C20 B8 with OX Label B9Figure N See Figure NINSPECTION, MAINTENANCE, and Cleaning Please Read the Following CarefullyDo not use damaged equipment Components Of #12 Description Parts List and Diagram 1 Acetylene RegulatorComponents Of #12 Components Of #20 Description Parts List and Diagram 2 Oxygen RegulatorComponents Of #8 Parts List and Diagram 3 Torch HandleComponents Of #26 Description Parts List and Diagram 4 Cutting AttachmentParts List and Diagram 5 Accessory Parts
Related manuals
Manual 20 pages 19.76 Kb