Section A
Installation
Technical Specifications
Wire Capacity |
|
|
|
Aluminum and Cored Wire | 030" - 1/16" (0.8 mm - 1.6 mm) | ||
Solid and Hard Wire | 030" | ||
Wire Speed (At rated feeder input voltage) | 70 - 875 ipm (22.2 mpm) | ||
Duty Cycle - 60% (All ratings are using Argon gas) | ............... 225 Amps Peak | ||
Shipping Weight (approximate) | 19.29 lbs. (8.29 | Kg) | |
Gun weight (less leads) | 2.5 lbs. (1.13 | Kg) | |
Support Equipment Required
•C.V. or C.C. power source of sufficient capacity for your needs.
•Regulated gas supply and hoses.
•Properly sized power leads from power source to wire feeder and ground.
Gun Lead Connections
Power Cable
A #2 AWG power cable is used on the Millermatic Compatible™ Python®. The gun end of the cable has a fitting crimped to the copper cable strands. This fitting is then threaded into the gun body. The cabinet end of the power cable is incorporated into the Power Pin connector.
The power cable gun end is a threaded fitting which screws into the gun body. The cabinet end is secured in the central body with a set screw. These connections utilize a conductive sealant and are tightened to a specific torque setting (reference exploded parts drawing in the Appendix for details) .
Conduit
The Millermatic Compatible™ Python® comes standard with a
Gas Hose
The gas hose is pushed over barbed fittings on both gun body and the Power Pin connector and is secured with a plastic tie wrap.
Electric Cable
A
Millermatic Python® Owner's Manual - Page