OPERATION
ORBITAL MOTION
Orbital motion is ideal for fast cutting action when removing old finishes, smoothing rough wood, cutting stock down to required dimensions, or for finishing surfaces to be painted. As shown in figure 6, the sandpaper moves in tiny circles at a very high speed, allowing the sander to move easily.
DUSTLESS SANDING
The dust bag located on the rear of your sander provides a dust collection system for your sander. Sanding dust is drawn up through the holes of the cushion and collects in the dust bag during sanding operation. For more efficient operation, empty dust bag when half full.
TO EMPTY DUST BAG
■Unplug your sander.
ORBITAL MOTION
Fig. 6
WARNING: FAILURE TO UNPLUG YOUR SANDER
COULD RESULT IN ACCIDENTAL STARTING
CAUSING POSSIBLE SERIOUS PERSONAL
INJURY.
■Unzip Dust Bag.
■Shake dust bag to empty.
■Zip dust bag up after emptying.
TO REMOVE DUST BAG FOR EMPTYING OR
CLEANING
See Figure 7.
■Unplug your sander.
WARNING: FAILURE TO UNPLUG YOUR SANDER
COULD RESULT IN ACCIDENTAL STARTING
CAUSING POSSIBLE SERIOUS PERSONAL
INJURY.
■Slide dust bag retainer from sander as shown by the arrow in figure 7.
Note: Grooves on dust bag retainer align with grooves on your sander.
■Empty dust bag.
TO INSTALL DUST BAG
See Figure 8.
■Unplug your sander.
WARNING: FAILURE TO UNPLUG YOUR SANDER
COULD RESULT IN ACCIDENTAL STARTING
CAUSING POSSIBLE SERIOUS PERSONAL
INJURY.
■Realign grooves on dust bag retainer with grooves on your sander.
■Slide dust bag assembly into place as shown by the arrow in figure 8.
Page 7
DUST BAG
TO REMOVE
DUST BAG
Fig. 7
DUST BAG
DUST BAG
RETAINER GROOVES
GROOVES
ON SANDER
Fig. 8