Oneida Air Systems 5 & 7.5 HP Direct Drive Cyclonic Dust Collectors manual Angle Iron Stand

Page 7

V. Angle Iron Stand

Cross Brace for Cyclone Angle Ring to sit on

1.Choose the system orientation, plenum can be on the right or the left of the cyclone. Bolt together the stand using the cross bars and 3/8” x 1” bolts. Note: the cross bar on the cyclone stand goes in the back so that the dust bin can slide out.

6

5 - 7.5 HP Direct Drive Owner’s Manual c O.A.S. 2002

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 5 HP Direct Drive Cyclonic Dust Collectors Table of Contents System Start-Up Information No Filter Vent Outside II & 7.5hp Direct Drive ConfigurationsSystem Performance III. General Specifications & Fan Performance CurvesTop View IV. DimensionsAngle Iron Stand VI. Assembly Instructions VII. Fan / Blower Maintenance VIII. External Filter Bag Assembly External Filter Cartridge Cleaning Intervals IX. Filter MaintenanceWiring should always be done by a licensed electrician IX. Single and Three Phase Wire DiagramAccessories Motor Overheating XII. TroubleshootingXIII. Fire Hazards Read Before Installing and Operating Checking in Order XIII. Terms and Conditions

5 & 7.5 HP Direct Drive Cyclonic Dust Collectors specifications

Oneida Air Systems is a recognized leader in the field of dust collection technology, offering a range of powerful solutions for both professional woodworkers and serious DIY enthusiasts. Among their impressive lineup, the 5 HP and 7.5 HP Direct Drive Cyclonic Dust Collectors stand out for their exceptional performance and engineering.

These dust collectors are designed to efficiently capture and remove airborne dust and debris generated during woodworking and industrial processes, promoting a cleaner and safer work environment. One of the primary features of these units is their direct drive motor system. Unlike traditional belt-driven models, the direct drive technology provides a more compact design with fewer moving parts, resulting in increased reliability and reduced maintenance.

Another key characteristic of the Oneida 5 HP and 7.5 HP models is their cyclonic separation design. This innovative technology allows for the effective separation of fine dust particles from larger debris. The cyclonic action creates a vortex that forces heavier particles downward into a collection drum, preventing clogging in the filter system. This not only enhances the efficiency of the dust collection process but also extends the lifespan of the filter by significantly reducing the amount of dust that reaches it.

Both models are equipped with powerful industrial-grade motors that deliver impressive airflow capabilities. The 5 HP unit provides approximately 1,800 CFM, while the 7.5 HP model exceeds 2,700 CFM, making them ideal for handling multiple machines connected via ductwork. Furthermore, these collectors feature dynamic impeller designs that maximize suction while minimizing noise levels, making them suitable for use in a variety of workshop environments.

User-friendly features such as quick-release collection containers and integrated caster wheels for easy mobility add to the practicality of these systems. The Oneida Air Systems dust collectors also come with a range of accessories, including ducting, blast gates, and HEPA filter options, allowing users to customize their setup according to their specific needs.

In summary, Oneida Air Systems’ 5 HP and 7.5 HP Direct Drive Cyclonic Dust Collectors offer unparalleled performance, innovative technology, and user-centric design. They are engineered to meet the demands of serious woodworkers and industrial applications, ensuring a cleaner workshop and a safer working environment. With their robust construction and efficient dust collection capabilities, these models are an investment in quality that pays off in both productivity and health.
Top Page Image Contents