Inspection, Maintenance and Cleaning
1.CAUTION: Prior to performing any inspection, maintenance, or cleaning of the Dust Collector Accessory Kit, make sure to turn OFF and then disconnect the power tool from the outlet.
2.BEFORE EACH USE, inspect the general condition of the Dust Collector Accessory Kit. Check for loose connections, misalignment or binding of moving parts, cracked, torn, or broken parts, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.
3.DAILY: With a soft brush, cloth, or vacuum, remove all debris from the Dust Collector Accessory Kit. If necessary, you may use a mild detergent.
4.Clean the hoses periodically by standing it on end and tapping it to remove dust and debris.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
| Parts List |
|
Part # | Description | Quantity |
1 | Flexible Hose, 4” x 10’ | 2 |
2 | Blast | 2 |
3 | Jointer | 2 |
4 | “Y” | 1 |
5 | Table Saw Dust Hood 12” x 12” 1 | |
6 | Wire Hose Clamp | 10 |
Parts Diagram
1
2 | 6 |
5
3
4
SKU 93601 | For technical questions please call | Page 5 |