Jet Tools DC-1100C specs

WARNING

1.Read and understand the entire contents of this manual before attempting assembly or operation. Do not use this machine until proper training and knowledge has been obtained.

2.Do not leave Dust Collector when plugged in. Unplug from outlet when not in use and before servicing.

3.Do not use outdoors or on wet surfaces.

4.Do not allow to be used as a toy. Close attention is necessary when used near children.

5.Use only as described in this manual. Use only manufacturer’s recommended attachments.

6.Do not use with damaged cord or plug. If Dust Collector is not working as it should, has been dropped, damaged, left outdoor, or dropped in water, return it to a service center.

7.Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run Dust Collector over cord. Keep cord away from heated surfaces.

8.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

9.Do not handle plug or Dust Collector with wet hands.

10.Do not put any objects into the openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

11.Keep hair, loose clothing, fingers, and all parts of body away from opening and moving parts.

12.Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

13.Do not use without dust bag and/or filters in place.

14.Turn off all controls before unplugging.

15.Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present.

16.Do not operate without hose connected to the inlet ports or covered by an inlet cap. Hazardous moving parts inside. Unplug machine before removing inlet port, inlet cap, hose, or inlet guard.

17.Use the inlet caps to cover the inlet port openings that are not connected to hoses.

18.Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead based paint

•Crystalline silica from bricks and cement and other masonry products, and

•Arsenic and chromium from chemically-treated lumber.

19.Your risk from those exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles

20.Do not operate tool while under the influence of drugs, alcohol or any medication.

21.Make sure the extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersize cord will cause a drop in the line voltage resulting in loss of power and overheating. The table below shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller gauge number, the heavier the cord.

22.Do not use dust collector for anything except wood dust. Materials such as liquids, metal shavings, metal dust, screws, glass, plastic or rock can cause sparks and/or damage when coming into contact with any part of the dust collector.

23.Ground your dust collector along all plastic componets. The connection of bare 12 gauge copper wire on all plastic hoses, fittings and blast gates to all machines will help reduce the occurrence of static build up and discharge.

SAVE THESE INSTRUCTIONS

DC-1100C specifications

The Jet Tools DC-1100C is a top-tier dust collection system designed specifically for woodworkers and craftsmen who prioritize a clean and safe working environment. This model brings powerful performance and innovative features that enhance functionality and user experience.

One of the standout characteristics of the DC-1100C is its robust 1.5 horsepower motor, delivering ample suction power to handle even the most demanding woodworking tasks. It operates at 1,200 CFM (Cubic Feet per Minute) airflow, effectively capturing dust and debris from your workspace, thereby improving air quality and visibility.

Remarkable for its dual-bag design, the DC-1100C features a 2.5-micron filter bag that captures finer particles, ensuring that even the smallest dust escapes are minimized. Additionally, this model is equipped with a 30-micron collection bag for larger debris, making it perfect for a variety of woodworking applications. This dual-bag system is easy to empty and maintain, allowing for seamless transitions between collection tasks.

The unit is built with a heavy-gauge steel construction that is both durable and stable, allowing for easy portability with the addition of four swivel casters. The casters provide excellent mobility, enabling users to maneuver the dust collector around the workshop effortlessly. Furthermore, the dust collector is designed with a compact footprint, making it suitable for workshops with limited space.

One of the key features of the Jet Tools DC-1100C is its noise-reducing design. The machine is engineered to operate at lower decibel levels, which is a significant advantage during long working hours. Safety is also a priority, as the unit includes a safety switch that prevents accidental start-ups, ensuring that users are protected while working.

The DC-1100C is compatible with a wide range of woodworking tools, thanks to its 4-inch dust port, which can connect easily to planers, sanders, and saws, enhancing workflow efficiency. The efficient airflow design optimizes performance and contributes to a cleaner workspace by minimizing the amount of airborne dust.

Overall, the Jet Tools DC-1100C combines power, convenience, and safety features that make it an essential tool for woodworkers seeking efficiency and cleanliness in their shops. Its advanced technology and user-friendly design are well worth the investment for anyone serious about woodworking and maintaining a dust-free environment.