Electrical Connections

All electrical connections must be done by a qualified electri- cian. All adjustments or repairs must be done

with the dust collector disconnected from the power source, unplugged. Failure to comply may result in serious injury!

The DC-1200BK/CK dust collectors are rated at 230V Only. The DC-1200 is not supplied with a plug. Use a plug and outlet rated at least 20 amps. The circuit for the machine should also be protected by at least a 20 amp circuit breaker or fuse.

The DC-1200-3BK and DC-1200-3CK are rated at 3 Phase 230V/460V, Prewired 230V. If you want to run these on 460V refer to the wiring diagram found on the inside of the switch box cover.

Keep in mind that a circuit being used by other machines, tools, lights, heaters, etc. at the same time will add to the electrical load. A dedicated circuit to the dust collector will give you the best results since dust collectors are generally used at the same time other tools are running.

Turning the Machine On & Off

This machine is intended for indoor use only.

All Models

Before hooking up to the power source, make sure that the switch is in the off position.

Turn the dust collector on by pressing the Start button mounted next to the motor. Press the Stop button to turn off the dust collector.

Remote Control (optional)

If you have the DC-1200BK or DC-1200CK, the DC- RC230 RF Remote Power Control unit is available as an optional accessory (contact Customer Service by calling the number on the cover).

Important: The DC-RC230 Remote Power Control can be used for activating Dust Collection units powered by 230V only up to 3HP, single phase only.

Dust Collector RF Remote Power Control (optional)

The DC-RC230 Remote Power Control (Figure 13) should be used for activating Dust Collection units powered by 230V only up to 3HP, 1 Phase. The DC- RC230 Remote Power Control unit is rated at 230V, Single Phase only. Use an outlet rated at least 20amps. The circuit for the device being controlled by the DC-RC230 should also be protected by at least a 20 amp circuit breaker or fuse.

Before hooking up to the power source, make sure that the switch is initially in the off position on both the dust collector and remote control unit (Figure 12).

Turning the DC-RC230 On & Off

This machine is intended for indoor use only.

1.Plug the dust collector into the main unit (Figure 13) and plug the main unit into the power outlet.

To start a machine or device:

2.Turn the machine itself on.

3.On the main unit place the switch to the ON position (Figure 12A). The red LED on the main unit should light up.

4.Press the button on the remote control transmitter (Figure 13) to turn the machine on.

5.To stop the machine, press the button on the remote control transmitter again.

Figure 12A	Figure 12B	Figure 13
Figure 12A	Figure 12B
		When the machine is running, it can be stopped by
		placing the switch on the main unit in the off position
		(Figure 13). To restart, repeat steps 3 and 4.

DC-1200CK specifications

The Jet Tools DC-1200CK is a highly efficient and powerful dust collection system designed for professionals in woodworking and metalworking industries. It provides a clean and safe working environment by effectively capturing dust and debris generated during operations. This dust collector features a robust 1.5 horsepower motor that ensures optimal airflow and suction power, making it an ideal choice for both small workshops and larger industrial setups.

One of the standout features of the DC-1200CK is its dual bag system. It comes equipped with a 30-micron filter bag that captures larger particles and a lower collection bag that allows easy disposal of dust. The dual bags work in concert to maximize dust collection, ensuring that the air in the workspace remains cleaner and healthier for users.

The DC-1200CK also boasts a 12-inch impeller that enhances air movement and efficiency. The impeller is designed to handle a range of materials, from fine sawdust to larger wood chips. This versatility makes it suitable for a variety of dust-producing machines, including table saws, planers, and sanders.

Another significant characteristic of the DC-1200CK is its easy-to-use collection system. The dust collector features a quick-release zipper on the lower bag for hassle-free disposal of collected dust. The top bag also includes a clear window, allowing users to monitor the fill level without removing it. This combination of features enhances usability and ensures that collectors can change out bags quickly and with minimal mess.

The design of the DC-1200CK also emphasizes noise reduction, with a sound level of just 70 decibels, making it quieter than many other options on the market. This is particularly beneficial in work environments where multiple people are working simultaneously.

In terms of mobility, the DC-1200CK comes with sturdy wheels that allow for easy transport within workshops. The integrated handle allows for maneuverability, making it simple to position the collector where it's needed most.

Overall, the Jet Tools DC-1200CK offers a blend of power, efficiency, and convenience, making it an excellent choice for anyone looking to improve their dust collection capabilities while maintaining a clean and safe workspace. Whether for home workshops or professional settings, this dust collector is engineered to meet the demands of serious woodworkers and metalworkers alike.