Nilfisk-ALTO American 12 manual How to Transport the Machine

Page 7

How to Transport the Machine

WARNING: The machine is heavy. Remove the motor from the machine before transporting. Get help loading the machine and motor.

To transport the machine, follow this procedure:

1.Make sure the power cable is disconnected from the electrical outlet.

2.Disconnect the handle plug connection. See figure 1.

3.Remove the belt cover.

4.Remove the fan belt.

5.Loosen the motor bolt. Using the ¾" wrench, turn the motor bolt counterclockwise. See figure 2.

6.Slide the motor forward.

7.Remove the drive belt.

8.Remove the motor from the chassis.

To re-assemble the machine after transporting, follow this procedure:

1.Reposition motor on chassis.

2.Install the drum belt. Slide the motor back until adequate tension is achieved in belt.

CAUTION: To prevent damage to the floor surface, make sure the drive belt is tight.

3.Resecure the motor to the chassis.

4.Install the fan belt.

5.Install the belt cover.

6.Reconnect the handle plug.

Figure 1

Figure 2

AMERICAN SANDERS TECHNOLOGY -American 12 Floor Sander Operator's Manual

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents American Contents of this Book Operator Safety Instructions Page Introduction and Machine Specifications Not fit the plug, consult your electrical contractor Service person or electrician230V Electrical Connection Instructions A dry buildingHow to Transport the Machine Machine Set-Up How To Install The AbrasivePage How to Operate the Machine Page Page Abrasive Bulk Roll Sanding Cuts and SandpaperSanding Pressure Sander Adjustment ProceduresDrum Rates Leveling How to Lubricate the Wheel PivotsDrive Belt Routine MaintenanceWheels Dust BagProblem Ause Ction TroubleshootingPage Americansanderstechnology American Sander Wiring Diagram 4/933242 Description Qty Model American 12 Floor Sander Drawing #2 10/00 Ref # Description Qty Model American 12 Floor Sander Parts List #2 10/00Optional Urethane Wheels American 12 Floor Sander Assembly Drawing #3 6/01Ref. No Description Qty American 12 Floor Sander Assembly Parts List #3 6/01Ref. # Description Qty Chatter Wave Prevention Proper Care of Your Machine can Minimize Chatter and Waves Alto Product Support Branches Highway 265 Springdale, Arkansas American Sanders Technology U.S. Warranty
Top Page Image Contents