18. Peak Limiter Control
The threshold level of the Peak Limiter is adjusted by this control.
19. Peak Limiter LED
This Led will light up when the Limiter function is activated.
3.5 The Rear Panel
21
UK / Aust
240V 
50Hz
Fuse:T315mAL
USA / Canada
60Hz
Fuse:T630mAL
AC INPUT
EUROPE
50Hz
RATED POWER CONSUMPTION: 40W
Apparaten skall anslutas till Jordat uttag nar den ansluts Till ett natverk
fuse 250V a with only Use
2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 | 2 | 1 |
| 3 |
| 3 |
| 3 |
| 3 |
| 3 |
| 3 |
| 3 |
| 3 |
|
|
| INPUT |
| INPUT |
| INPUT |
| INPUT |
| INPUT |
| INPUT |
| INPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OUTPUT |
| OPERATING LEVEL |
| OPERATING LEVEL |
| OPERATING LEVEL |
| OPERATING LEVEL |
| OPERATING LEVEL |
| OPERATING LEVEL |
| OPERATING LEVEL |
| OPERATING LEVEL |
| 4dBu |
| 4dBu |
| 4dBu |
| 4dBu |
| 4dBu |
| 4dBu |
| 4dBu |
| 4dBu |
| 10dBV |
| 10dBV |
| 10dBV |
| 10dBV |
| 10dBV |
| 10dBV |
| 10dBV |
| 10dBV |
RETURN | SEND | RETURN | SEND | RETURN | SEND | RETURN | SEND | RETURN | SEND | RETURN | SEND | RETURN | SEND | RETURN | SEND |
CHANNEL 8 | CHANNEL 7 | CHANNEL 6 | CHANNEL 5 | CHANNEL 4 | CHANNEL 3 | CHANNEL 2 | CHANNEL 1 | ||||||||
20 | 22 | 23 | 25 | 24 |
Pic.6: Pear Panel Of The CLE8.0
20. AC Inlet and Fuse Holder
This connector is used to connect the supplied power cord. Please check the Voltage accepted by the unit and the Voltage available from your AC sockets before connecting the unit to the Mains.
21. Audio In
These connectors are used to input the signal source. You can input the signal via the balanced 1/4" TRS phone jack or XLR connector.
22.Audio Out
These connectors are used to output the signal. You can output the signal via the balanced 1/4" TRS phone jack or XLR connector.
23.Operating Level Control
This control is used to adapt this unit to either the
The Input / Output Level Meter (2) is referenced automatically to the selected level, i.e. an optimum operating range of the meter will always be ensured.
24. Send
Through this 1/4" unbalanced jack the audio signal can be routed to an external processor for sidechain effect.
25. Return
The return signal from an external processor will be inputted through this 1/4" jack.
9