130oC |
| The charger automatically | |||
|
|
|
|
| shuts off if the ambient |
|
|
|
|
| temperature becomes too |
|
|
|
|
| high. As a consequence the |
|
|
|
|
| charger will be inoperable. |
|
|
|
|
| The charging base must be |
|
|
|
|
| disconnected from the mains |
|
|
|
|
| supply and taken to an |
|
|
|
|
| authorised service centre for |
|
|
|
|
| repair. |
|
|
|
|
| The charging base is |
|
|
|
|
| intended for indoor use only. |
Features
1.Dust collector extension
2.Dust collector
3.Release button
4.On/Off switch
5.Charging indicator
6.Filter cleaning button (DV1205 & DV9605)
7.Charging base
Fig. A
8.Crevice tool
9.Brush tool
Identifying your product
The model design can be determined from the suffix codes used in the catalogue number. The following catalogue numbers are described in this manual:
DV60XXY/DV72XXY/DV96XXY/
DV12XXY.
The suffix code XX corresponds to the following designs:
05:All units, supplied with a small crevice tool and a brush tool.
The suffix code Y is used to identify the range of colour/finish options.
The suffix code Y represented by the letter N is used for models fitted with a NiMH battery.
The suffix code Y represented by the letter H is used for models fitted with a HEPA filter.
ENGLISH
Installation
Fitting the charging base to the wall
The charging base can be placed on a work top or fitted to the wall to provide a convenient storage and charging point for the appliance.
When fixing to a wall, make sure that the fixing method is suitable for the wall type and is appropriate to the weight of the appliance.
Assembly
Fitting the accessories (fig. A & B)
These models are supplied with some or all of the following accessories:
A crevice tool (8) for confined spaces.
A brush tool (9) for furniture and stairs.
To fit an accessory, proceed as follows: Take the accessories from its storage position on the appliance or charging base (7) (fig. L & M). Insert the appropriate accessory into the front of the appliance.
Use
Before first use, the battery must be charged for at least 16 hours. Place the appliance on the charging base whenever it is not in use.
Charging the battery (fig. C)
Before charging the battery:
Make sure that the dust collector extension (1) is pushed back into the dust collector (2).
Make sure that the appliance is switched off. The battery will not be charged with the on/off switch (4) in the on position.
Place the appliance on the charging base (7) as shown.
Plug in the charger. Switch on at the mains.
The charging indicator (5) will be lit. Leave the appliance to charge for at least 16 hours.
6 |