ASSEMBLY
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION MANUAL.
ASSEMBLING CASTER ASSEMBLIES TO BASE
Align the holes in caster assembly (A) Fig. 5, with four holes in support stand (B) located on the underside of base (C). Place a lockwasher (E) Fig. 5 onto a hex head screw (D), insert the hex head screw through the caster (A), and thread into hole in base (B). Repeat this process for the three remaining holes in the caster and base. Assemble the three remaining caster assemblies to the base in the same manner. Fig. 6 shows a caster assembled to the base.
A
C
B
E
D
Fig. 5
ASSEMBLING BLOWER AND MOTOR ASSEMBLY TO BASE
1.Set motor assembly (A) Fig. 7, on base (B).
2.Align mounting holes in the motor assembly (A) Fig. 7, with four
3.Fig. 8, illustrates the motor assembly fastened to the base.
Fig. 6
B A
E
D
C
Fig. 7
Fig. 8
5