
Instructions For Disassembly Of The Shotgun
1.Make sure the shotgun is unloaded (FOLLOW UNLOADING INSTRUCTIONS) and pointed in a safe direction.
2.Make sure the trigger block safety is engaged in the “on” or “safe” position. (See Picture 30).
Picture 30
3.Remove the fore end from the barrel by pulling out the mechanical lever in the lower center of the fore end and removing the fore end in a downward outward swinging motion. (See Picture 31). Never force the fore end off the barrel and receiver.
Picture 31
4.With the barrels and receiver supported with one hand, push the top lever fully to the right and tip the barrels down until they disengage from the receiver. Check the barrels for damage and obstructions after removal. (See Pictures 32A and 32B).
Picture 32A | Picture 32B |
16