Senco SPS manual Tool Specifications, Tool Model, Inches 11 ⁄4 11 ⁄2, Staples/Box 10/M Boxes/Carton

®

Roofing and Medium-Duty Stapler SPS

Tool Specifications:

Tool Weight: 5.3 lbs.

Height: 9 7/ 8"

Length: 13 1/2"

Width: Main Body 3 1/32"

Staple Capacity: 140+

Mode of Operation: either bottom fire/trigger fire tools or trigger fire tools are available*

Operating Pressure Range: 70-120 p.s.i.g.

Tool	Model	Fastener Range
1 1/2" Roofer	340005N	P12-P17
1 1/4" Industrial	340002N	P11-P15
1 1/2" Industrial	340004N	P12-P17

Any of the SPS models above can be adapted to drive 1/2" through 3/4" P staples by ordering and installing P/N FAO 155. A modified magazine assembly is required to drive 1 3/4" and 2" staples.

Companion SENCO Tools:

The PW drives P08, P10, P11, P12, P13, and P15. The MW drives P11, P12, P13, P15, P17, and P19 (with modified magazine).

Tool Specifications:

Fastener Specifications:

P Series Staples

•Crown: 1" (25mm)

•Wire Size: 16 Gauge (1.6 mm)

	Inches	3⁄4"	7⁄8"	1"	11 ⁄4"	11 ⁄2"
Lengths
	Millimeters	19	22	25	32	38
Part No.		P11BAB	P12BAB	P13BAB	P15BAB	P17BAB
Staples/Box		10/M	10/M	10/M	10/M	10/M
Boxes/Carton		1	1	1	1	1

NOTE: All part numbers shown are for galvanized carbon steel staples with chisel point and SencotePlus®.

* “Restrictive Trigger” activated tools are	firing. You must keep the trigger pulled
used for applications where precision nail	while moving the tool along the work sur-
or staple placement is desired. You must	face with a bouncing motion, depressing
first depress the safety element where you	the safety element where you want to drive
want to drive a nail or staple and then pull	a nail or staple.
the trigger. After each nail or staple is driv-	Trigger Fire Method: First depress the
en, completely release the trigger and lift	safety element where you want to drive a
the tool off the work surface.	nail or staple and then pull the trigger.
“Dual Action” activated tools are used	For instructions on safe use of tools with
for applications where high-production	either of these activating mechanisms,
work is desired. There are two modes of	please refer to the Operating Instructions or
operation:	Customer Satisfaction and Safety
Bottom Fire Method: This method of	Reminder contained in your tool carton.
operation is sometimes called bounce

For additional information on how Senco fastening systems will save you time, reduce costs, and increase quality, call your nearest Authorized Senco Dealer or Distributor listed in the Yellow Pages under “Staples,” or call our toll-free Action Line: 1-800-543-4596.

©1998 by Senco Products, Inc. Order MK313 (7.5AMP1098) Litho in U.S.A.

3/4	7/8	1
P11	P12	P13

11/411/2

P15P17

Safety First. The only way to work.®