Figure C
Specific Safety Rules for the Stapler
1.Maintain labels and nameplates on the Stapler. These carry important information. If the labels are unreadable or missing, contact Harbor Freight Tools for replacement.
2.Always place the Stapler on a dry, flat, level, sturdy
3.Turn off the Stapler and unplug it from its electrical outlet before removing any jammed staples.
4.Keep the Power Cord clear of the stapling area.
5.To protect the Stapler housing, never place the Stapler near a heating source.
6.The Stapler is not a toy and should not be used by children.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SKU 93682 | For technical questions please call | Page 6 |