H7947/H7948 16 Gauge Stapler
Tighten the exhaust cover cap screw.
3.
Rotating Exhaust
Cover
The exhaust cover rotates as needed to direct the exhaust away from you.
To rotate the exhaust cover:
1. Use the 4mm hex wrench to loosen the exhaust cover cap screw as shown in Figure 5.
Figure 5. Loosening the exhaust cap
screw.
2. Rotate the exhaust cover by hand to aim the exhaust port in the desired direction.
Using the Stapler
Read the manual before operation. Become familiar with these staplers, their safety instructions, and opera- tion before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed.
Before you operate your stapler, place five to six drops of air tool oil into the quick connect fitting where the stapler connects to the air supply.
To operate your stapler:
1.Connect the air supply to the quick connect fitting on your stapler.
2.To test for proper staple penetration, hold the stapler perpendicular to the surface of a piece of clean scrap wood that is thick enough for the length of staples you have loaded.
3.Depress the safety nose mechanism against your workpiece.