4. Drop staples in channel (see Figure 4).
Note: We recommend that you only use PowerFast or Swingline heavy- duty staples in this tool.
Wrong staples can cause jamming.
5Slide staple chamber cover closed. Make sure cover locks into place.
Staples
Figure 4
Operating Tool
!WARNING: Keep trigger lock in the OFF position and finger off trigger until ready to drive staple.
!WARNING: Keep all body parts away from staple exit on tool.
1.Make sure trigger lock is in the OFF position.
2.Plug tool into a 115 Volt/60 Hertz outlet.
3.Grip tool firmly.
4.Slide trigger lock to the ON position.
Trigger
Lock
Figure 5