OPERATION
Getting Started
Please take the time to become familiar with this instruction manual. The informa- tion contained will allow you to get the maximum enjoyment and use from your new tool.
Loading The Stapler
The Model H3119 can hold up to 85 sta- ples in the quick loading magazine.
To load the stapler:
1.Unplug the tool from the power source!
2.Press the silver lever while sliding back on the staple magazine.
3.Point the tip of the stapler upward to reveal the stapler loading area. The loading area consists of a groove or channel that runs along the bottom of the stapler.
4.Load a stick of 20 gauge 3⁄16" crown staples 1⁄4" to 9⁄16" long into the loading area.
5.Slowly slide the staple magazine back into the closed position until the silver lever latches in the closed position.
Using The Stapler
DO NOT pull the trigger until the tip of the stapler is against the surface to be stapled. The stapler does NOT have a safety mechanism.
1.Be sure the stapler is loaded and the magazine is closed securely.
2.Wear safety glasses when using the stapler
3.Plug the stapler into a 110V power source.
4.Place the tip of the stapler against the workpiece and pull the trigger.
Avoid repeatedly shooting staples into the exact same location without moving the tip of the stapler. A staple could become jammed in the tip of the stapler.
H3119 Electric 3⁄16" Crown Stapler |