5.Squeeze trigger to fire.
6.IMPORTANT: Do not fire this tool
when empty of staples. This may damage tool.
Note: In difficult fastening jobs, press down on head of tool with palm of free hand (see Figure 6). This will improve staple driving.
Figure 6
Maintenance
WARNING: Do not alter this tool in any way. Only use accessories designed for this tool.
WARNING: Never perform steps listed below while tool is plugged in. Accidental discharge may occur. Move trigger lock to the OFF position and unplug tool.
Tool Jam
1.If tool jams, move trigger lock to the OFF position and unplug tool.
2.Turn tool upside down.
3.Press in latch lock and slide staple chamber cover back until fully open.
4.Remove unused staples.
5.Remove staple(s) causing jam.
6.Reload tool (see Loading Tool, page 5).
Cleaning
Use a clean cloth to remove dirt from tool. Do not use solvents when cleaning plastic parts.
Lubrication
Do not oil or grease any part of tool. This may damage tool.
IMPORTANT: Do not attempt to repair tool or replace broken parts.
099241 | 7 | www.desatech.com |
|
|