Heath Zenith SL-5503, SL-5505 installation instructions Quartz Halogen Floodlight

Page 1

Model SL-5503 - 300 Watts

Model SL-5505 - 500 Watts

Quartz Halogen Floodlight

The Heath®/Zenith Quart Halogen Floodlight disperses light over a wide area. It includes a halogen lamp, attaches to a standard threaded junction box cover plate and is for use with 120 VAC.

FOR PROPER INSTALLATION AND OPERATION, PLEASE READ THESE INSTRUCTIONS CAREFULLY.

To Avoid Fire Or Burn Hazards:

Allow fixture to cool before touching. The bulb and the fixture operate at high temperatures.

Keep fixture at least 2” from combustible materials. Do not aim at objects closer than 3 feet.

Use a lamp that does not exceed the maximum ratings for your model. Maximum ratings are: SL-5503 - 300 Watts; SL-5505 - 500 Watts.

Fixture Installation Instructions

To avoid Electrical Shock:

WARNING: Turn power off at the circuit breaker or fuse.

Follow all warnings listed on fi xture.

Grounding and installations must comply with local codes and the National Electric Code.

This product should be mounted on a grounded junction box and must be used with a threaded cover plate.

Permanently mount the fi xture to a building or pole.

Fixture is designed for WALL MOUNT ONLY (see illus- tration below).

Thread aiming arm through the cover plate (not included) and tighten the locknut. Apply silicon caulk for a raintight seal.

Connect the lamp wires to the power source wiring. Secure with wire connectors.

Black to Black

 

Fixture ground to

junction box ground.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Attach the cover plate to the junction box (Apply silicon caulk between cover plate and junction box for a raintight seal). Keep the fixture horizontal (within +/- 4°) so the bulb inside is horizontal. If the bulb is not horizontal, the bulb may darken or shatter and fail prematurely.

Loosen the side bolt connected to the arm to aim the fixture up and down.

Bulb Installation and Relamping

Important: Use a clean glove or cloth when handling the new bulb. Oil from your hand may cause the bulb to crack when the fi xture heats up and result in premature failure. Use isopropyl (rubbing) alcohol to clean the bulb if it is touched with your bare hands.

When relamping, turn power off and let the fixture cool.

Remove glass cover and remove the old bulb by pushing the bulb towards the right until the left side of the bulb is clear of the left socket.

To insert the new bulb push the bulb into the right socket so the bulb is properly seated in the sockets.

Re-install the glass cover.

Reconnect the power.

Cover Plate

White to White

WIRING FIXTURE

(Product May Vary from Illustration)

No Service Parts Available for this Product

598-1138-02

598-1138-02

© 2007 HeathCo LLC

Image 1
Contents To Avoid Fire Or Burn Hazards Quartz Halogen FloodlightInstrucciones para la instalación del artefacto Faro Halógeno de CuarzoInstalación de la bombilla y cambio de lámpara Para evitar pellgros de fuego o de quemazónInstallation et remplacement des ampoules Mode d’installation du projecteurProjecteur halogène au quartz Câblage du LuminaireFive Year Limited Warranty

SL-5503, SL-5505 specifications

The Heath Zenith SL-5505 and SL-5503 are advanced motion-activated security lights designed to enhance outdoor safety and convenience. Both models encapsulate modern technology and practical features, making them ideal for homeowners seeking reliable and efficient lighting solutions.

One of the primary features of the SL-5505 and SL-5503 is their powerful LED lighting. The SL-5505 is equipped with a dual-head design that allows for a broader and more adjustable area of illumination. This effective design ensures that no corner of your property remains in darkness. The SL-5503, while slightly less expansive, boasts a high lumen output that delivers bright, clear light, crucial for deterring potential intruders.

Both models utilize cutting-edge motion detection technology. They come integrated with a passive infrared sensor that detects movement within a specified range, activating the lights automatically when someone approaches. This feature not only provides added security but also ensures that the lights are energy-efficient by only turning on when needed.

The SL-5505 and SL-5503 also include customizable settings, such as adjustable sensitivity and timer functions. These settings allow users to tailor the operation of the lights based on the specific requirements of their property. Homeowners can choose how sensitive the motion sensors should be and set how long the lights remain illuminated after activation, providing flexibility to suit various environments.

In terms of construction, both models are built to withstand outdoor conditions. They feature durable housing materials that resist fading and wear from exposure to the elements. This robustness gives users confidence that their lighting solutions will function effectively over time.

Installation of the Heath Zenith SL-5505 and SL-5503 is straightforward, making them accessible for the average homeowner. With clear instructions and all necessary mounting hardware included, users can quickly set up their lighting system without the need for professional assistance.

For energy-conscious individuals, both the SL-5505 and SL-5503 are designed to be energy-efficient, utilizing LED technology that consumes significantly less energy compared to traditional halogen lights. This efficiency not only reduces energy bills but also aligns with environmentally friendly practices.

In conclusion, the Heath Zenith SL-5505 and SL-5503 provide an excellent blend of functionality, durability, and efficiency. With their strong LED illumination, advanced motion detection, and customizable features, these security lights are perfect solutions for enhancing outdoor spaces while ensuring safety and convenience. Homeowners looking to upgrade their outdoor lighting will find these models to be reliable and effective choices.