Floodlight

Items	Models
247589	UT-5675-BZ
247588	UT-5677-BZ

Questions or problems? Before returning to your retailer, call our technical service department at 1-800-858-8501 (English speaking only), 7:30 am to 4:30 pm, CST, Monday – Friday.

Package Contents

•	Floodlight	• Bulb
•	Wire connectors

Installation Instructions

Estimated Installation Time: 30 minutes

Items needed for installation (not included):

• Phillips and flathead screwdrivers

•	Pliers	•	Wire strippers/cutters
•	Safety glasses	•	Silicone caulk
•	Ladder	•	Black tape

READ ALL INSTRUCTIONS CAREFULLY BEFORE

BEGINNING INSTALLATION.

NOTE: All wiring must be run in accordance with the National Electrical Code (Canadian Electrical Code in Canada) through conduit or another acceptable means. Contact a qualified electrician if there is any question as to the suit- ability of the system.

2.Connect the fixture wires to the junction box wires (black to black, white to white, and the fixture ground wire to the junction box ground wire). Secure with the wire connectors provided.

3.Secure the cover plate (not included) to the outdoor weatherproof junction box (not included) with two screws (not included).

4.Apply weatherproof silicone caulking around cover plate to provide a watertight seal.

5.Adjust the fixture to aim in the general direction desired. If pos- sible, turn the light fixture so the photocontrol* does not point at another light or reflective surface near the fixture.

6.When you have the floodlight aimed where you want it, tighten the lock nut on the mounting arm and the locking screw at the fixture joint.

7.Release the clasp that holds the lens closed.

Model 5675 - Install ONLY a 100 watt mercury vapor type H38 bulb (provided).

Model 5677 - Install ONLY a 70 watt high pressure sodium type S62 bulb (provided).

8.Close the lens and lock it shut with the clasp.

Lamp in Fixture Contains Mercury. Dispose According to Local, State, or Federal Laws.

WARNING: Turn power off at the circuit breaker or fuse.

1.Install light fixture to an approved outdoor weatherproof junction box cover plate (not included).

Testing

To test operation during daylight, cover the photo control with black tape. Turn on the power. The light will take up to ten minutes to reach full brightness. Remove the tape from the photo control and your unit will operate automatically—on at dusk, off at dawn.

In Case of Difficulty

If your floodlight does not turn on automatically or cycles on and off, it could be affected by other nearby lights or is seeing its own light. In either case, loosen the plastic nut that secures the photocontrol. Slide the metal reflector under the nut so that the reflector causes the photocontrol to look away from nearby lights or reflective surfaces and retighten the plastic nut.

Fixture

Locking Screw

Metal Reflector

	Photocontrol	WARNING - Risk of fire. Do not aim the bulbs at a
	Photocontrol	combustible surface within 3 ft. (1 m).
		combustible surface within 3 ft. (1 m).
	Mounting	Lock Nut
	Arm	Lock Nut
	Arm
		Cover Plate
		Junction Box

Gasket

© 2007 HeathCo LLC	598-1287-03
	598- -

UT-5675-BZ, UT-5677-BZ, UT-5676-BZ specifications

The Heath Zenith UT-5676-BZ, UT-5677-BZ, and UT-5675-BZ are advanced motion sensor floodlights designed to enhance the security and convenience of any residential or commercial property. These models embody the ideal combination of reliability, performance, and innovative technology. Each unit not only illuminates an area effectively but also serves as a deterrent against potential intruders, making them essential components in outdoor lighting solutions.

A notable characteristic of these floodlights is their impressive brightness. With high-intensity LEDs integrated into each unit, they provide robust illumination, ensuring that any motions within the designated area are easily detected and illuminated. The UT-5676-BZ and UT-5677-BZ models boast adjustable light intensity settings, allowing users to customize the brightness according to their specific needs. This feature is especially beneficial in driveway or backyard applications where illumination requirements may vary throughout the day.

All three models are equipped with state-of-the-art motion detection technology. The robust sensors are designed to detect movement from up to 40 feet away while covering a wide angle of 180 degrees. These floodlights are capable of adjusting their sensitivity settings, ensuring that they minimize false alarms triggered by small animals or nearby vehicle movements. This adaptability makes them ideal for a range of environments, from quiet residential areas to bustling commercial properties.

Another significant advantage of the UT-5676-BZ, UT-5677-BZ, and UT-5675-BZ models is their durability and weather resistance. Constructed from high-quality materials, these floodlights can withstand various weather conditions, including rain, snow, and extreme temperatures, ensuring long-term operation. The bronze finish adds an aesthetic element, allowing them to seamlessly blend into any exterior decor while standing up to the elements.

Installation is another key feature of these floodlights. They come with easy-to-follow instructions and all the necessary mounting hardware, making it feasible for homeowners and professionals alike to set them up quickly and efficiently. Additionally, the adjustable heads of the floodlights allow for flexibility in directing the light precisely where it's needed.

In conclusion, the Heath Zenith UT-5676-BZ, UT-5677-BZ, and UT-5675-BZ motion sensor floodlights provide a comprehensive outdoor lighting solution. With their bright LED lights, advanced motion detection technology, and sturdy, weather-resistant design, these models offer security, functionality, and style. Whether for personal safety or enhancing property aesthetics, these floodlights represent an outstanding investment in home and business security lighting.