Panasonic SC-HC30 manual Wall mount instructions, Detach the stand from the unit

Attaching the unit to a wall (Optional) (continued)

Wall mount instructions

•Before installation, turn the unit off and disconnect the AC mains lead plug from the AC receptacle.

•Tighten screws firmly to prevent slack in each step.

1.Detach the stand from the unit.

 Unscrew the fixing screw A (2 pieces) at the bottom of the unit.  Slide the stand off the unit.

Keep the removed screws in a safe place.

Bottom of main unit

Stand

Soft blanket or cloth

Fixing screw A

2. Attach the wall bracket to the back of the unit.

Align both tabs on the wall bracket and the main unit, then

slide it in until it clicks into place.

Wall bracket (bottom view)

	2
Tab
Rear of	1
main unit

Secure the wall bracket with fixing screw B (2 pieces). (Tightening torque: 1.2 Nm to 1.5 Nm)

Fixing screw B

3.Drive the mounting screws into the wall.

Measure and mark the position of the mounting screw C (2 pieces) and drive them into the wall.

•Use figures below for screw positions and measurements.

•Please install using both wall mounting screws.

•Use a level ruler to ensure both screws are level.

•Use a screw which is strong enough to support the weight of at least 20 kg.

Rear View		A length which supports the
	Wall	strength of 20 kg or more must
		be kept for each screw.

300 mm
Space required		163 mm
				8 mm to 9.5 mm
130 mm			4 mm
				2.2 mm to 2.8 mm
74.8 mm		Mounting screw C		2.5 mm to 3.5 mm
				RQTX1073
		Space required
77.5 mm	85.5 mm
500 mm

700 mm 5