Dayton operating instructions Model 3VG79, General Safety Information

Page 3

Dayton Operating Instructions and Parts Manual

Model 3VG79

General Safety Information

Make certain you read and understand all warnings. Keep these instructions for reference. They are your guide to safe and proper operation of this heater.

Safety information appears throughout these instructions. Pay close attention to them. Below are definitions for the safety information listed throughout this manual.

Under this heading, installation, operating

and maintenance procedures or practices will be found that, if not carefully followed, WILL result in IMMEDIATE serious personal injury or death.

Under this heading, installation, operat-

ing, and maintenance procedures or practices will be found that, if not carefully followed, COULD result in severe personal injury or death.

Under this heading, installation, operating,

and maintenance procedures or practices will be found that, if not carefully followed, COULD result in minor personal injury, product or property damage.

IMPORTANT: Every possible circumstance that might involve a hazard cannot be anticipated. The warnings in this manual and on tags or decals affixed to the unit are therefore not all-inclusive. If a procedure, work method, or operating technique not specifically recommended by Dayton is used, you must make sure it is safe for you and others. You should also ensure that equipment will not be damaged or made unsafe by the operating or maintenance method you choose.

Carbon monoxide poisoning may lead

to death!

Carbon monoxide poisoning: Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, and or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have heater serviced. Some people are more af- fected by carbon monoxide than others. These include pregnant women, people with heart or lung disease or anemia, those under the influence of alcohol, and those at high altitudes.

Improper use of this heater can

cause serious injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poisoning.

Make certain you read and understand all warnings. Keep these instructions for reference. They are your guide to safe and proper operation of this heater.

• Use only kerosene or No. 1

fuel oil to avoid risk of fire or explo- sion. Never use gasoline, naphtha, paint thinners, alcohol, or other highly flammable fuels.

Fueling

a)Personnel involved with fueling shall be qualified and thoroughly familiar with the manufacturer's instructions and applicable federal, state, and local regulations regard- ing the safe fueling of heating units.

b)Only the type of fuel specified on the heater's data plate shall be used.

c)All flame, including the pilot light, if any, shall be extinguished and the heater allowed to cool, prior to fueling.

d)During fueling, all fuel lines and fuel-line connections shall be inspected for leaks. Any leaks shall be repaired prior to returning the heater to service.

e)At no time shall more than one day's supply of heater fuel be stored inside a building in the vicinity of the heater. Bulk fuel storage shall be outside the structure.

f)All fuel storage shall be located a minimum of 25 feet from heaters, torches, welding equipment, and similar sources of ignition (excep- tion: the fuel reservoir integral with the heater unit).

g)Whenever possible, fuel storage shall be confined to areas where floor penetrations do not permit fuel to drip onto or be ignited by a fire at lower elevation.

h)Fuel storage shall be in accor- dance with the federal, state, or local authority having jurisdiction.

Never use heater where gasoline, paint thinner, or other highly flammable vapors are present.

Follow all local ordinances and codes when using heater.

Heaters used in the vicinity of tarpaulins, canvas, or similar enclo- sure materials shall be located a safe distance from such materials. The recommended minimum safe dis- tance is 10 feet. It is further recom- mended that these enclosure materials be of a fire retardant nature. These enclosure materials shall be securely fastened to prevent them from igniting or from upsetting the heater due to wind action.

®

3

Version B - For Reduction

G016.J

Image 3
Contents General Specifications DescriptionUnpacking Product Identification Dayton Portable Oil-Fired HeatersModel 3VG79 General Safety InformationCross Section Operational View General Safety Information Theory of Operation FuelsAssembly VentilationOperation FAN MaintenancePump Pressure Adjustment Upper Shell RemovalFuel Filter Fuel ValveSpark Plug Nozzle Pump RotorSTORING, TRANSPORTING, or SHIP- Ping Preventative Maintenance ScheduleFor Replacement Parts, call Replacement Parts List Replacement Parts Illustration for Model 3VG79 NTC-4C Replacement Parts List for Handle and Wheel Group Accessories Maintenance KitsWiring Diagram Possible Causes Troubleshooting ChartLimited Warranty

3VG79 specifications

The Dayton 3VG79 is an advanced subwoofer that excels in delivering exceptional audio quality for home theater enthusiasts and audiophiles alike. Renowned for its impressive performance and robust build, this model has carved a niche for itself in the competitive audio market.

One of the standout features of the Dayton 3VG79 is its powerful driver. Equipped with an 8-inch polypropylene cone, the subwoofer produces deep, resonant bass that enhances movie watching and music listening experiences. The cone is designed to minimize distortion, ensuring that the bass remains clear and impactful, even at high volumes. The rubber surround provides durability and flexibility, contributing to the longevity and performance of the subwoofer.

The Dayton 3VG79 is powered by a highly efficient 200-watt amplifier, which allows for optimum performance without compromising on audio quality. This built-in amplifier is specifically tuned to match the subwoofer's driver, enabling it to deliver robust sound with clarity across all frequencies. It boasts a frequency response range that extends down to 25 Hz, making it ideal for reproducing the lowest notes found in movie soundtracks and music.

Another notable characteristic of the Dayton 3VG79 is its versatile connectivity options. With both line-level and speaker-level inputs, it can easily integrate into various audio setups. This flexibility makes it suitable for both home theater systems and stereo music playback, allowing users to experience immersive sound in any context.

The design of the Dayton 3VG79 is sleek and modern, featuring a black wood veneer finish that complements any home decor. Its compact form factor makes it easy to position in a room without taking up excessive space, while still providing powerful sound output. The subwoofer also comes with adjustable controls for volume, phase, and low-pass crossover, which allows users to customize their audio experience to suit personal preferences and room acoustics.

In summary, the Dayton 3VG79 subwoofer combines advanced technologies, powerful performance, and versatile features, making it a top choice for those seeking to elevate their audio experience. Its robust construction, exceptional sound quality, and stylish design ensure that it stands out in today's audio landscape. Whether for home theater setups or music playback, the Dayton 3VG79 delivers bass that truly enriches the listening experience.