Panasonic SC-PM313 important safety instructions Sound adjustment, External unit

• Play timer and record timer cannot be used together.

• The play timer will start at the preset time with volume increasing

gradually to preset level.

• The record timer will start 30 seconds before the set time with the

volume muted.

• The timer comes on at the set time everyday if the timer is on.

• The unit must be in the standby mode for the timer to function.

• If you turn the unit off and on again while a timer is functioning, the

fi nish time setting will not be activated.

• If AUX is selected as the source, when the timer comes on, the

system turns on and engages AUX as the source. If you want to

Sound adjustment

33/5.$ %1

playback or record from a connected unit, set the other unit’s timer

to the same time. (See the other unit’s instruction manual.)

"!3342%",%

3522/5.$

02%3%4 %1

External unit

!58

Connecting external unit

Preparation:

•Make sure that the power supply for all components has been turned off before making any connections.

•For details, refer to the operating instructions of the unit which is to be connected.

•All peripheral components and cables sold separately.

Connecting analog equipment

This example shows how to connect an analog player with a PHONO OUT/LINE OUT switch.

When units other than those described are to be connected, please consult your dealer.

(L)

(R)

		AUX
“LINE OUT”	R	L
position
Analog player (not included)	Rear panel of this unit

•An analog player with a built-in phono equalizer can be connected.

•Set the switch to the “LINE OUT” position at the back of the analog player.

Playing or recording from an external

unit

1	Press [AUX].
2	For listening: Proceed to step 3.
	For recording: Press [¶/8 REC] to start recording.
3	Start playback from the external source. (For details,
	refer to the external unit’s instruction manual.)

Selecting sound effects

You can change the sound effect by selecting Super Sound EQ, Preset EQ or adjusting the bass or treble effect.

Super sound EQ

Provide you with clearer bass and treble effects.

To activate

Press [S.SOUND EQ] to display “S.SOUND EQ” indicator.

To cancel

Press [S.SOUND EQ] again to clear “S.SOUND EQ” indicator.

Preset EQ

Press [PRESET EQ] repeatedly to select your desired setting.

HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF

Setting	Effect
HEAVY	Adds punch to rock
CLEAR	Clarifi es higher frequencies
SOFT	For background music
VOCAL	Adds gloss to vocal
EQ-OFF	No effect

Bass or treble

Enable you to enjoy the lower or higher pitch sound.

1	Press [BASS/TREBLE] repeatedly to select your
	desired setting.
	Setting	Effect
	BASS	For lower pitch sound
	TREBLE	For higher pitch sound
2
	Press [∞] or [5] to adjust the level.
	The tone level can be varied within -3 to +3.

Enjoying surround sound

Enable you to add natural width and depth to the stereo sound.

To activate

Press [SURROUND] to display “ ” indicator.

To cancel

Press [SURROUND] again to clear “ ” indicator.

•Surround sound is less discernible when listening through headphones.

•If interference in FM stereo reception increases, cancel the surround sound effect.

13

RQT7923