| Instruction Sheet Number IS:48023E | |
Page 2 of 2 | Wiring Diagram for Soli Emergency |
|
Read and understand these instructions before installing fixture.
This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To assure full compliance with local codes and regulations, check with your local electrical inspector before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
B. OPERATION
When AC power is applied, the charging indicator light is illuminated indicating that the battery is being charged.
When the power fails, the emergency lighting ballast automatically switches to emergency operation, keeping one lamp illuminated at reduced output for 90 minutes.
C. MAINTENANCE
Although no routine maintenance is required to keep the emergency ballast functional, it should be checked periodically to ensure that it is working. The following schedule is recommended:
1.Visually inspect the charging indicator light monthly. It should be illuminated.
2.Test the emergency operation of the luminaire once every 3 months. One lamp should operate at reduced output.
3.Conduct a 90 minute discharge test at least once a year or more if required by local ordinance. One lamp should operate at reduced output for 90 minutes.
Lightolier a Genlyte Thomas Company www.lightolier.com
631 Airport Road, Fall River, MA 02720 (508)
© 2003 Genlyte Thomas Group LLC (Lightolier Division) A0403