ADJUSTMENTS
FENCE HEIGHT ADJUSTMENT
See Figure 5.
The fence on your biscuit joiner can be moved up and down to adjust the position of the blade in relation to the top of the workpiece. A scale on both sides of the front base indicates height settings for both 45° and 90° angles. The fence and height indicator mark can be positioned from 5/16 in. to 13/16 in. from the center of the blade for 45° angles. It can be positioned from 0 to 3/4 in. from the center of the blade for 90° angles. Scale marks are in increments of 1/16 in.
TO ADJUST HEIGHT SETTING
See Figure 5.
■Unplug your detail biscuit joiner.
WARNING:
Failure to unplug your detail biscuit joiner could result in accidental starting causing possible serious personal injury.
■Loosen the two height adjustment knobs.
■Pull the fence forward and slide it up or down until the height indicator mark is aligned with the desired dimen- sion on the scale.
NOTE: Slots in the front base align with a tab on the backside of the fence. See Figure 6. This alignment keeps the fence square at each height setting.
■Tighten height adjustment knobs securely.
FENCE ROTATION / ANGLE ADJUSTMENT
See Figure 6.
The fence on your biscuit joiner can be rotated 180° and set at either 45° or 90° angles.
TO ROTATE FENCE / CHANGE ANGLE SETTING
See Figure 6.
■Unplug your detail biscuit joiner.
WARNING:
Failure to unplug your detail biscuit joiner could result in accidental starting causing possible serious personal injury.
■Loosen the two height adjustment knobs.
■Pull the fence forward and slide it down the front base until it can be removed through the key hole slots.
■Rotate the fence 180°.
■Reinstall the fence on the front base. Place height adjust- ment knob bolts in key hole slots and align bolt heads with the slots on back of front base.
■Slide fence up the front base to desired depth of cut.
■Tighten height adjustment knobs securely. See Figure 6.
FENCE
HEIGHT
ADJUSTMENT
KNOB(S)
5
16
45°
3
4
0
90°
TO LOWER | HEIGHT |
FENCE | SETTING SCALE |
| Fig. 5 |
|
|
|
|
| 5 |
|
|
|
|
| 16 |
|
|
|
|
| 45° |
|
|
|
|
| 3 |
|
|
|
|
| 4 |
HEIGHT |
|
|
|
|
|
ADJUSTMENT | 3 | 2 | 1 |
| 0 |
|
|
| |||
KNOBS |
|
|
| 1 | 90° |
|
|
|
| ||
|
|
| 3 |
| |
|
|
|
| 2 |
|
(1) PULL |
|
|
|
| FRONT |
FORWARD |
|
|
|
| |
|
|
|
|
| BASE |
|
|
|
|
| FENCE |
(2)SLIDE DOWN
FENCE ORIENTATION
FOR 45° ANGLES
HEIGHT
ADJUSTMENT
KNOB BOLT(S)
SLOTS
TABS
KEY HOLE
SLOTS
FRONT
FENCE ORIENTATION SLOT(S) BASE FOR 90° ANGLES
Fig. 6
Page 10