3M 2273 manual Locating EMS Markers, Locating Markers while Tracing Cable Path

Page 19

LOCATING EMS MARKERS

EMS markers may be detected and located using either the Dynatel™ 2205 or 2206 EMS Marker Locating Accessory. To attach the accessory, slide the Receiver horizontally into EMS Marker Locating Accessory mounting slot. Make sure the locking button holds the Receiver securely in the slot. To separate the units, press the locking button down and slide the Receiver out of the EMS Marker Locating Accessory mounting slot.

Press to turn the Receiver on.

Locating Markers while Tracing Cable Path

To detect markers while tracing the cable path, set the 2205 or 2206 accessory mode switch to the Alert position, and trace the cable path normally. The internal buzzer in the accessory will alert you to the proximity of a detected marker.

Note: Do not use Null or Differential modes when using the 2205 or 2206.

Locating Markers using the Receiver

If the buzzer response is too broad, the exact marker position may be pinpointed by using the Receiver.

Select 577 Hz or 33 kHz on the Accessory. Use a different frequency from the tracing signal.

Turn the Receiver ON, select Peak mode, and set the frequency to match the Accessory setting.

Note: The initial Receiver gain in Peak mode is optimized for interfacing with the 2205 or 2206 Accessory while searching for a marker. Press only when a marker is detected and the signal is too strong. To search for a new marker, reset the Receiver gain to the initial setting by turning its

power OFF and back ON, or pressing and then re-selecting the Peak mode.

Refer to the EMS Marker Locating Accessory operating instructions for further information.

Page 18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dynatel Advanced Cable Fault Locator Table of Contents Introduction Installing or Replacing the BatteriesReceiver Battery Test Initial Receiver ConfigurationUsing External DC Power and 5 Watt Output Transmitter Battery TestLocating a Buried Cable Transmitter SetupDirect Connect Method Cable Receiver Setup Dyna-Coupler Method Induction Method Receiver Setup About Trace Modes Selecting Auxiliary Frequencies Selecting Passive Power FrequenciesDetermining Cable Depth and Current Using Current Indications During Locating Locating Sheath Faults Cable path Red leg Determining ADP Depth Locating AN Active Duct Probe ADPLocating EMS Markers Locating Markers using the ReceiverLocating Markers while Tracing Cable Path Toning Aerial Faults Cable Identification Cable or Pair IdentificationPair Identification Optional AccessoriesEnvironmental Technical InformationTransmitter ReceiverImportant Notice

2273 specifications

3M 2273 is a high-performance double-sided tape that is engineered for a variety of demanding applications in both industrial and household settings. This tape is particularly well-regarded for its versatility and strong bonding capabilities, making it a popular choice among professionals and DIY enthusiasts alike.

One of the standout features of 3M 2273 is its robust adhesive technology. It utilizes a proprietary acrylic adhesive that provides excellent bonding strength on a wide range of surfaces, including metals, plastics, glass, and painted materials. This versatility allows users to apply the tape in different scenarios, whether it’s for mounting, joining, or attaching parts. The ability to adhere to challenging substrates without the need for additional primers or surface treatment simplifies the application process.

The tape is designed with a unique combination of a thick carrier film and a high-quality adhesive layer, which contributes to its durability and reliability. The thick backing provides excellent conformability, allowing the tape to maintain its adhesion even on irregular or textured surfaces. This feature is particularly valuable in automotive, aerospace, and construction industries, where the integrity of bonds is crucial.

Another key characteristic of 3M 2273 is its temperature resistance. This tape can perform effectively in a wide temperature range, making it suitable for applications exposed to heat or cold environments. Whether it’s used in manufacturing processes or for outdoor projects, the tape maintains its bonding properties, ensuring long-lasting performance.

The transparency of 3M 2273 adds to its appeal, particularly for applications where aesthetics are important. The discreet appearance allows for clean finishes, making it ideal for use in electronic devices, graphics, and signage where visible seams could compromise visual appeal.

Furthermore, 3M 2273 is easy to manipulate, allowing for quick and efficient application. The tape is available in various widths and lengths, catering to the diverse needs of users. It also boasts excellent shear strength, which helps it resist slippage and provides a secure hold over time.

In summary, 3M 2273 stands out in the realm of double-sided tapes due to its exceptional bonding capabilities, temperature resistance, and versatility across a variety of substrates. Its reliable performance and user-friendly design make it an essential tool in both industrial settings and everyday applications, ensuring that it meets the rigorous demands of users worldwide.
Top Page Image Contents