tyfeSa
Maintenance and Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury from accidental operation:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
etupS
atierOp
e nanc Maint
Cleaning, Maintenance, and Lubrication
BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
After Use:
1.Remove and empty the Dust Bag.
2.Wearing
3.Wipe external surfaces of the tool with clean cloth.
4.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
Page 14 | For technical questions, please call | Item 68987 |