ENGLISH
Table of contents |
|
IMPORTANT SAFETY INSTRUCTIONS | ............ 3 |
Listening caution | 3 |
Product service | 3 |
Preparing the remote control | 4 |
Making the connections | 4 |
Overview of controls | 5 |
Discs | 6 |
Using an iPod or iPhone | 7 |
Radio | 8 |
Clock and timers | 8 |
Sound effects | 9 |
External equipment | 9 |
Remote control code | 9 |
Troubleshooting guide | 9 |
Maintenance | 10 |
Specifications | 10 |
Limited Warranty | 11 |
Español |
|
Cómo preparar el control remoto | 12 |
Cómo realizar las conexiones | 12 |
Visión de los controles | 13 |
Discos | 14 |
Cómo usar un iPod o iPhone | 14 |
Radio | 15 |
Reloj y temporizador | 15 |
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
MPEG
Making the connections
Conserving power
The system consumes approximately 0.1 W when it is in standby mode. Disconnect the power supply if you do not use the system.
Some settings will be lost after you disconnect the system. You have to set them again.
Preparing the remote control
(not included)
Use alkaline or manganese battery.
Install the battery so that the poles (+ and
Point the remote control at the remote control sensor (Z 5), away from obstacles, at a maximum range of 7 m (23 feet) directly in front of the main unit.
CAUTION!
• Do not break open or
• Do not charge the alkaline or manganese battery.
• Do not use the battery if the cover has peeled off.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.
• Mishandling of battery can cause electrolyte leakage, which can cause a fire.
• Remove the battery if you do not use the remote control for a long
RQTX1249 | period of time. Keep in a cool, dark area. | |
| ||
CAUTION! | ||
| ||
| Danger of explosion if battery is incorrectly replaced. Replace only | |
4 | with the same or equivalent type recommended by the manufacturer. | |
Dispose of used batteries according to the manufacturer’s | ||
| instructions. |
1 Connect the FM indoor antenna.
Place the antenna where reception is best.
Adhesive tape
2 Connect the AM loop antenna.
Click!
3 Connect the AC power supply cord.
Use the included AC power supply cord with this system only. Do not use an AC power supply cord from other equipment.
Note:
•These speakers do not have magnetic shielding. Do not put them near TVs, PCs or other equipment easily influenced by magnetism.
•You cannot remove the net of the speakers.