Energy Tech Laboratories DSH installation instructions Table of Contents

Page 3

FORM 145.32-IOM1 (908)

Changeability of this document

In complying with Johnson Controls policy for continu- ous product improvement, the information contained in this document is subject to change without notice. While Johnson Controls makes no commitment to up- date or provide current information automatically to the manual owner, that information, if applicable, can be obtained by contacting the nearest Johnson Controls service office.

It is the responsibility of operating/service personnel as to the applicability of these documents to the equipment in question. If there is any question in the mind of oper- ating/service personnel as to the applicability of these documents, then, prior to working on the equipment, they should verify with the owner whether the equipment has been modified and if current literature is available.

TABLE OF CONTENTS

 

safety symbols

2

Changeability of this document

3

TABLE OF CONTENTS

3

GENERAL INFORMATION

4

PRE-INSTALLATION INSPECTION OF EQUIPMENT

6

RIGGING

6

INSTALLATION

6

UNIT MOUNTING

7

SEPARATION OF UNITS

8

INTERCONNECTING REFRIGERANT TUBING - SPLIT INSTALLATION

8

DUCTWORK

11

LOUVER SIZING GUIDELINES

11

ELECTRICAL WIRING

12

PACKAGED UNIT

12

SPLIT SYSTEM

12

MOTOR AND PULLEY DATA

14

BLOWER SPEED ADJUSTMENT

14

START-UP AND OPERATION

15

REFRIGERANT CHARGES

15

PRESSURE SWITCH SETTINGS

15

MAINTENANCE / SERVICE

17

FILTERS

17

EVAPORATOR AND CONDENSER COILS

17

BLOWERS

17

DRIVE BELTS

17

REFRIGERANT CIRCUIT(S)

17

COMFORT ALERT™ DIAGNOSTICS

18

LED DESCRIPTION

18

INTERPRETING THE DIAGNOSTIC LEDS

18

Installation Verification

21

Johnson Controls

3

Image 3
Contents Model DSH Ceiling Mounted Ducted R-410A Read Before Proceeding General Safety GuidelinesTable of Contents General Information Typical Installation Drawing PRE-INSTALLATION Inspection of Equipment InstallationRigging Unit Mounting Separation of Units Interconnecting Refrigerant Tubing Split InstallationDimensional Data Dimensional Data Louver Sizing Guidelines DuctworkElectrical Wiring Packaged UnitSplit System Standard Motors Model FAN Performance DataMotor and Pulley Data Blower Speed AdjustmentPressure Switch Settings START-UP and OperationRefrigerant Charges Typical Schematic Blowers Maintenance / ServiceFilters Evaporator and Condenser CoilsComfort Alert Diagnostics Interpreting the Diagnostic LedsLED Description Status LED Troubleshooting Information Low line voltage to compressor Installation Verification Exclusions Limited WarrantyCompressor Five Year Limited Warranty Labor and Cost not Covered410A Quick Reference Guide Form 145.32-IOM1

DSH specifications

Energy Tech Laboratories DSH is a pioneering organization at the forefront of energy technology innovation. With a commitment to sustainability and efficiency, DSH focuses on developing cutting-edge solutions that address modern energy challenges. The laboratory excels in research and development, primarily emphasizing renewable energy, energy storage systems, and smart grid technologies.

One of the main features of Energy Tech Laboratories DSH is its state-of-the-art research facilities that house advanced equipment and tools for experimentation and analysis. The laboratories are equipped with simulation tools that facilitate the modeling of complex energy systems, enabling researchers to assess the performance of new technologies under various conditions. This capability is vital for optimizing energy solutions before they are deployed in real-world applications.

DSH has developed several key technologies that exemplify its innovative spirit. Solar photovoltaic (PV) integration is one of the flagship projects, focusing on enhancing the efficiency of solar panels through novel materials and designs. The laboratory continuously investigates new photovoltaic materials that can significantly increase sunlight conversion rates, reducing the overall cost of solar energy.

In addition to solar technologies, DSH is a pioneer in the field of energy storage. The laboratory works on advanced battery technologies, including lithium-sulfur and solid-state batteries, which promise higher energy densities and longer life cycles compared to conventional lithium-ion batteries. These enhancements are vital for the effective storage of renewable energy, allowing for smoother integration into the power grid.

Moreover, Energy Tech Laboratories DSH is heavily invested in smart grid technologies, which enhance the efficiency of electricity distribution through real-time data analysis and improved grid management. By deploying advanced metering infrastructure and predictive analytics, DSH aims to create resilient energy systems that can respond dynamically to consumer demand and integrate various energy sources seamlessly.

The laboratory's dedication to collaboration with industry partners, government agencies, and academic institutions ensures that its research is translated into practical solutions. This synergy fosters innovation and accelerates the adoption of sustainable technologies.

In conclusion, Energy Tech Laboratories DSH stands as a pillar of innovation in the energy sector, exemplifying a strong commitment to developing technologies that support a sustainable future. Its focus on renewable energy, energy storage, and smart grid solutions positions it as a key player in the ongoing transition towards a cleaner and more efficient energy landscape.