Operation / Cleaning / Service / Warranty
Changing the nozzle
Too much heat causes paints and plastics to ignite.
CAUTION! Do not inhale the resulting vapours.
Protector nozzle 4 – for removing paint and varnish (see Ill. B):
Place the protector nozzle 4 on the outlet tube 3 .
The spatula shape of the nozzle ensures the air is properly directed. Use a separate spatula for removing paint or varnish.
Flat nozzle 5 – for detaching glues, softening paint (see Ill. C):
Place the flat nozzle 5 on the outlet tube 3 . Do not apply heat for too long a period, as burnt paint becomes much more difficult to remove. Many glues can be softened by warm- ing. Glued connections can then be detached and excess glue removed.
Reducing nozzle 6 – for welding plastic: Place the reducer nozzle 6 on the
outlet tube 3 .
Use the reducing nozzle 6 for
Further examples of uses in the house, car and garden
Defrosting water pipes:
Notice! It must not be used for thawing PVC pipes. Notice! It is often very difficult to tell the difference between gas pipes and water pipes. If in doubt, ask a competent person.
Notice! Copper pipes are joined using tin solder and must not be heated above 200 °C.
Loosening a threaded connection: Heating the threaded connection carefully can often allow the connection to be released.
Removing weeds:
The heat dries out the weeds and micro- organisms.
Lighting barbecue charcoal (see Ill. E):
Do not use methylated alcohol. Push the barbecue lighting nozzle 7 on to the hot air nozzle 3 .
Charcoal ignites in a few minutes.
Wax removal:
You can remove wax residues from skis / snow- board or from candle holders. Use the amount of care appropriate to the product.
Cleaning
Before carrying out work on the appliance, always remove the plug from the power socket.
Keep the air inlet and outlet clean.
Use a cloth to clean the housing. Use a soft cloth to clean the housing. Never use petrol, solvents or cleaning agents as these may attack the plastic.
Service
Have your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use.
If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use.
Warranty
The warranty for this appliance is for 3 years from the date of purchase. The ap- pliance has been manufactured with care
10 GB/IE