Bryant 674B Before You Call for Service, If insufficient heating or cooling is suspected

Page 4

E. Before You Call for Service ...

...check for several easily-solved problems.

If insufficient heating or cooling is suspected:

( ) Check the air filter for dirt. Check for blocked return-air or supply-air grilles. Be sure they are open and unobstructed. If these checks do not reveal the cause, call your servicing dealer.

If your unit is not operating at all, check the following list for easy solutions:

( ) Check to be sure that your thermostat temperature selector is set below the indoor temperature during the cooling season or above the indoor temperature during heating season. Be sure the SYS- TEM switch or MODE control is in the COOL or HEAT position and not in the OFF position.

( ) If your unit still fails to operate, call your servicing dealer for troubleshooting and repairs. Specify the model and serial numbers of your unit. (Record them in this manual in the space provided.) If the dealer knows exactly which unit you have, he may be able to offer suggestions over the phone, or save valuable time through knowledgeable preparation for the service call.

F. In Case of Trouble

If you perform the steps above and unit performance is still unsatisfactory, shut off the unit and call your dealer.

Dealer’s Name ______________________________________

Telephone__________________________________________

Unit Model_________________________________________

Unit Serial Number___________________________________

© 2003 Bryant Heating & Cooling Systems 7310 W. Morris St. Indianapolis, IN 46231

—4—

Printed in U.S.A.

om1021

Catalog No. 5367–401

Image 4
Contents Safety Considerations Unit IntroductionStarting or Shutting Unit Off To start the unit To shut unit offCooling Mode II. Heat Pump Heating ModeIII. GAS Heat Mode IV. Defrost ModeRegular Dealer Maintenance Warranty CertificateIf insufficient heating or cooling is suspected Before You Call for ServiceCase of Trouble