Regulatory Information
Declaration of Conformity | Declares that the following product: Quality Department | |
(According to EN 45014) | Product Name: | Master Appliance Corp. |
Manufacturer’s Name: | Conforms to the following | FAX (262) |
| ||
Master Appliance Corp. | product specifications: | IMPORTANT: Please read and |
Manufacturer’s Address: | Safety Directives: | understand all instructions before |
EN 123 12.81 | using this tool. Become familiar | |
Racine, WI 53402 U.S.A. | EN 292 parts 1&2 EN 294 | with all controls for your safety. |
Description
| Gas open/close knob | |
| Soldering tip | |
Windows | ||
| ||
| Knurled nut |
Stand
Shutter Lever
Ignition button
Gas level
window
Protective Cap
Gas refill nozzle
Set contents
1.Tool
2.Plastic cap
3.Operation manual
Specification
Size (with soldering tip):
7.32in. x 6.77 in. (186mm x 172mm)
Weight when gas filled: Approx. 352 gr.
Temperature values:
Soldering tip end… approx. 932°F/500°C
Hotblow tip end… approx. 1112°F/600°C
Gas container capacity: 80 c.c.
Operating time per filling: More than 3 hours
Principles of Operation
This product uses a catalytic gas reaction | Chrome Plated |
| Copper Base |
system. The special catalyst contained in the | Iron | Pla | ted |
|
tip is preheated with a butane flame. The preheated flame is extinguished when the shutter is closed over the ignition vent.
Butane gas continues to flow over the | Tinned | Hot Air Vent Catalyst |
| ||
preheated catalyst generating infrared heat |
| |
|
| |
which is either conducted through the soldering |
|
|
iron tip or passed through the heat tip as hot gas. |
| |
Evaporated Gas
Fill with Ultratane™ Butane
Use only Master Ultratane butane with your Ultratorch. Do not fill gas or store near open flame, heater, furnace or combustible materials.
Fill gas holding the unit firmly with the refill nozzle pointed upwards. Gas will overflow from nozzle when tank is full.